Are Low-Profile Tile-Insert Drains Reliable for New Projects with Recycled-Content Requirements?

Project Suitability at a Glance

The ODO-001-QHP is a low-profile tile-insert floor drain that can be considered for new construction when its dimensions, material grade, and compliance documents meet the project specification. Its documented construction is 304 stainless steel, while recycled content has not been verified in the available product information.

• The drain is listed at 600 × 80 × 25 mm, with customized dimensions available for different floor layouts.
• Its tile-receiving cover helps the drain blend into the surrounding floor finish and supports a concealed visual effect.
• At 25 mm high, the design may suit applications with limited installation depth, subject to site verification.
• Finish choices include brushed steel, PVD brushed grey, PVD brushed gold, PVD brushed black, baked lacquer, and chrome.
• Listed applications cover residential bathrooms, wet rooms, hotels, commercial buildings, renovation projects, and other bathroom drainage environments.

Design, Dimensions, and Installation Considerations

A tile-insert drain is built to accommodate a section of matching floor tile inside or above the drain cover. This arrangement allows the drainage channel to coordinate more closely with the finished floor than a conventional exposed grate.

The ODO-001-QHP has a documented size of 600 × 80 × 25 mm and a listed material thickness of 2.0 mm. ODO also indicates that product size and thickness can be customized. Before specification, installers should confirm the required channel length, floor build-up, waterproofing detail, outlet arrangement, and available installation depth.

Material and Recycled-Content Verification

The supplied documentation identifies the ODO-001-QHP as stainless steel 304. It does not provide a recycled-content percentage, recycled-material certificate, environmental product declaration, or chain-of-custody record. As a result, the product should not be described as recycled-material drainage unless ODO supplies separate evidence that satisfies the project or green-building requirement.

Surface Options and Visual Coordination

The documented finish range includes brushed steel, PVD brushed grey, PVD brushed gold, PVD brushed black, baked lacquer, and chrome. The supplied model description refers to brushed gunmetal grey, while the broader finish list indicates that additional appearance options may be available for customized orders.

Quality Controls, Certification, and Applications

ODO states that production is monitored through 14 quality-control processes covering the route from incoming raw materials to completed products. The company also lists a floor-drain CE credential identified as Floor drain CE AiTSZ-250718038RC09-CE-ROHS. This supports the documented compliance position for the relevant product range, but it is not evidence of recycled stainless-steel content.

The manufacturer describes its drainage solutions for shower rooms and wet rooms, including complete linear drain systems. It also identifies ultra-slim drainage products for old-house renovation and existing floors with restricted height. These use cases are relevant to low-profile design, although the ODO-001-QHP must still be checked against the actual structural, waterproofing, and plumbing conditions of each project.

Reported project experience includes hotel renovation, luxury villas, commercial complexes, residences, resorts, offices, and historic-building renovation. Examples include tile-insert invisible drains for a luxury villa development in Italy, ultra-thin drains for a historic building in Rome, and barrier-free drainage for a senior-care project in Australia.

Specification Review

Frequently Asked Questions

Does the ODO-001-QHP contain recycled material?

The available product data specifies 304 stainless steel but does not state a recycled-content ratio or include supporting recycled-material documentation. Buyers should request this evidence directly if recycled content is a mandatory criterion.

Can it be used in a low-height renovation?

The listed overall height is 25 mm, and ODO identifies ultra-slim drainage as a solution for old-house renovation. Final suitability depends on the existing floor structure, waterproofing assembly, drainage connection, and required fall.

Why may it be suitable for a new project?

The product has recorded dimensions, configurable sizing, several finish options, OEM and ODM support, and a stated 14-step QC process. The listed CE credential may support compliance review, while recycled-content claims must be assessed separately.

What after-sales support is listed?

ODO states that it provides a two-year product warranty, re-shipment for transit damage, spare-parts support, technical assistance, and customized service. The listed product MOQ is 20 pieces.

Conclusion and Specification Advice

The ODO-001-QHP is a documented 25 mm tile-insert floor drain made from 304 stainless steel, with a 600 × 80 mm format, a listed 2.0 mm thickness, customizable sizing, multiple finishes, and 14 stated QC processes. These characteristics make it a practical candidate for residential, hospitality, wet-room, commercial, and renovation projects when the technical details match the site conditions.

It should not, however, be classified as a recycled-material drain based on the supplied information alone. For projects with environmental product targets, request a recycled-content declaration and relevant certificates before approval. For technical solutions, customized specifications, or project support, contact charlene@seosodo.com.

About ODO

Foshan Pinshi Sanitary Ware Co., Ltd., operating under the ODO brand, is a sanitary ware manufacturer with facilities in Foshan, Zhongshan, and Jiangmen, Guangdong. Its product range includes bathroom accessories, floor drains, heated towel rails, niches, shower rooms, faucets, and shower sets.

Founded in 2014, the company reports a factory area of approximately 20,000 square meters, 20 production lines, more than 200 production and R&D equipment units, and monthly output of about 100,000 pieces. Its listed credentials include Floor drain CE AiTSZ-250718038RC09-CE-ROHS and Shower niche CE EMC Certificate-AiTSZ-250428030C-C01. ODO reports experience serving clients in multiple industries.