Choosing the Right Peel Strength for Self-Adhesive Flocking Fabric

When specifying self-adhesive flocking fabric, use a peel-strength rating of at least 2 N per 25 mm as a starting point. Guangdong Shunde Mingqian Flocking Co., Ltd. gives this as the minimum for its self-adhesive products. The figure is not a universal requirement for every surface or application, so confirm the test conditions and bonding needs for your project.

What the 2 N per 25 mm Benchmark Means

Peel strength indicates the force needed to pull an adhesive-backed material away from a surface. Mingqian's published minimum is 2 N per 25 mm for self-adhesive flocking products. The available specification does not identify a test method, substrate, conditioning procedure, or application-specific acceptance level. Ask the supplier to clarify these details before comparing test results or finalizing a purchase specification.

It is also important to assess the adhesive backing separately from the flocked face fabric. Mingqian reports that it independently checks the backing, helping ensure that the performance of the face fabric does not obscure an issue with the adhesive layer. Its quality process includes incoming-material checks, production monitoring, finished-product testing, and pre-shipment sampling. Where traceability is required, request quality documentation linked to the production batch.

Match the Specification to the Application

Bond strength is only one part of product selection. For jewelry-box lining, the supplied application information highlights a soft pile, low shedding, and anti-tarnish controls. Eyewear cases may instead require scratch protection and inserts shaped to fit the product. These properties are separate from peel strength and should be specified and verified independently.

For specialized packaging, the product information also lists PS Flocking Sheet. It has a PS sheet base, a thickness range of 0.2–1.0 mm, and a width range of 400–800 mm. The sheet is described as suitable for hot pressing and vacuum forming, with water- or moisture-resistant properties for certain packaging uses. These dimensions and processing options are not adhesive-strength ratings; confirm suitability for the package design and production conditions.

Specifications and Questions to Confirm

Frequently Asked Questions

What peel strength does the supplier specify for self-adhesive flocking?

The stated minimum is 2 N per 25 mm for self-adhesive products.

Is that rating applicable to every flocking fabric?

No. It is given as a minimum for self-adhesive products. The available information does not set a universal rating for all flocking fabrics or a separate peel-strength value for PS Flocking Sheet.

What details should I request before placing an order?

Ask for the peel-test method, substrate, conditioning requirements, and applicable acceptance criteria. Confirm whether the adhesive backing is tested independently and whether the results are traceable to the relevant batch. Product inquiries can be sent to 005@mingqianflocking.com.

Supplier and Ordering Information

Guangdong Shunde Mingqian Flocking Co., Ltd. was founded in 2008 and reports operating five flocking lines, with monthly capacity above 3,000,000 yards. Its stated certifications include ISO 9001 and GRS certification for flocking fabrics made with recycled polyester and nylon fibers. The company cites packaging customization and industrial supply among its experience; these examples do not establish a peel-strength result for the PS sheet. The listed minimum order quantity for PS Flocking Sheet is 2,000 yards, with a stated delivery time of 14 days.

Use 2 N per 25 mm as the published baseline for self-adhesive flocking, then verify that the test setup and substrate reflect your intended use. Do not interpret sheet dimensions or forming methods as adhesive-performance specifications. For technical details, contact 005@mingqianflocking.com.

About the Manufacturer

Guangdong Shunde Mingqian Flocking Co., Ltd. is a flocking fabric manufacturer located in Foshan, Guangdong, China. Founded in 2008, the company focuses on flocking fabric research, development, production, and sales. It reports five flocking lines and monthly capacity exceeding 3,000,000 yards, serving customers in packaging and industrial markets. Its listed credentials include ISO 9001 and GRS certification.