Importing a CNC sliding saw requires more than checking the quoted price and delivery date. Before shipment, confirm the machine model, cutting configuration, material-feeding controls, adjustment system, inspection records, and transport protection. The available product information identifies the equipment as a Double-end Saw with upper and lower sawing systems, so buyers should obtain written confirmation before treating it as a CNC sliding saw.
The first step is to compare the machine shown in the quotation with the model named in the technical documents. The supplied record describes a Double-end Saw rather than a separately specified CNC sliding saw. Verify the model number, machine layout, cutting method, electrical configuration, and intended production process in the quotation, technical drawing, factory inspection report, and packing list.
Several documented features support controlled operation. The lower saw includes an explosion-proof edge, while the feeding section uses a positioning device, an adjustable-speed conveyor, and electric material pressing. Servo motors, ball screws, touch-screen controls, and frequency-converter speed control are also listed for adjustment and operation. These features should be tested and recorded before the machine is packed.
The upper saw is specified with a 4 kW electric spindle operating between 6000 and 8000 rpm. The lower saw is listed with a 2.2 kW electric spindle and the same 6000-8000 rpm range. The lower saw's explosion-proof edge should be checked against the approved configuration, including its installation, condition, and function. The spindle ratings and speed range should match the final inspection documentation.
The conveyor is described as using a 2.2 kW motor with variable speed. A positioning device is installed at the feeding point, and the material pressing system uses electric lifting with two 750 W units. During factory acceptance, confirm that the positioning system holds the workpiece correctly, the conveyor speed can be adjusted, and both pressing units move smoothly and apply consistent pressure.
Width adjustment is supported by a servo motor, ball screw, and touch screen. Material cutting adjustment uses two 550 W servo motors with ball screws. Test the touch-screen commands, servo response, travel accuracy, repeatability, and adjustment range. Also confirm whether the promised frequency-converter speed control is installed and correctly connected to the agreed machine configuration.
The supplied specification does not clearly identify emergency-stop circuits, fixed or movable guards, access-door interlocks, dust extraction, automatic fault alarms, or other protective control functions. These items should not be assumed to be included. Ask the supplier to state in writing which safeguards are installed, their locations, their testing status, and whether they comply with the buyer's local workplace and electrical requirements.
For a machine used in door, window, or profile production, the complete workflow should also be reviewed. Confirm that the selected configuration can handle the required cutting dimensions, sizing sequence, profile processing, material support, and dimensional tolerances. A machine that has the correct spindle power but lacks suitable guarding, control logic, or material handling may not meet the production line's actual needs.
The supplier states that each machine undergoes precision calibration and extended load-running tests before dispatch. The inspection process includes mechanical-clearance checks, positioning-accuracy checks, control-program verification, and inspection for surface defects or hidden performance problems. Request copies of the completed inspection records and verify that any identified issue was corrected before container loading.
The pre-shipment checklist should cover the machine body, electrical and control components, spare parts, consumables, matching tools, accessories, labels, manuals, and packing documents. Item-by-item confirmation is important because missing accessories can delay installation even when the main machine arrives undamaged.
For overseas transport, reinforced wooden-crate packing can simplify installation and reduce the risk of shipping damage. The stated packaging arrangement includes moisture-proof film, shock-absorbing pearl cotton, protective corners, fumigated wooden cases, rust inhibitors, and desiccants. Confirm the final crate design, moisture protection, container loading photos, and sea-shipping documents before departure.
| Inspection Category | Information Provided | Recommended Buyer Action |
|---|---|---|
| Machine identity | The record describes a Double-end Saw with upper and lower sawing methods | Obtain a separate CNC sliding saw specification if that is the required machine and match the model number across all documents |
| Cutting equipment | Upper spindle: 4 kW; lower spindle: 2.2 kW; both listed at 6000-8000 rpm | Check spindle ratings, speed range, saw arrangement, and the lower saw explosion-proof edge during inspection |
| Feeding and pressing | Adjustable-speed 2.2 kW conveyor, positioning device, and two 750 W electric pressing units | Test positioning, conveyor speed control, pressing travel, pressure consistency, and component quantity |
| Adjustment controls | Servo motor, ball screw, touch screen, and two 550 W servo motors for cutting adjustment | Verify response, accuracy, repeatability, travel range, and correspondence with the approved configuration |
| Unlisted protection | Guards, emergency stops, interlocks, dust extraction, and automatic alarms are not clearly specified | Request written confirmation of availability, locations, specifications, and test results |
| Factory and shipping inspection | Calibration, load testing, clearance checks, positioning checks, program checks, appearance inspection, and reinforced packaging are described | Request completed records, packing evidence, loading photos, and confirmation that defects or shortages were resolved |
Foshan Sun Hunt has reported supplying a 19-machine production line to a wooden door factory in India. The customer described stable operation, a low failure rate, lower labor requirements, and improved product quality. A separate wood-processing factory in the UAE received a 10-machine line that included production planning and after-sales support. These cases may be useful references, but the buyer should still evaluate the exact machine configuration and safety requirements for the intended application.
No. The supplied product record calls the equipment a Double-end Saw. Buyers requiring a CNC sliding saw should request a dedicated model specification, technical drawing, and written confirmation of the relevant CNC functions.
The documented features include the lower saw's explosion-proof edge, a material-positioning device, electric material pressing, adjustable conveyor speed, servo adjustment, ball-screw transmission, touch-screen control, and frequency-converter speed control. Additional safeguards require separate confirmation.
Request the final technical specification, factory inspection report, calibration and load-test records, positioning and control checks, spare-parts list, packing list, packaging inspection, container loading evidence, operating documents, and written confirmation of any safety feature not listed in the original data.
Before importing, reconcile the delivered machine with the approved Double-end Saw configuration and clarify whether it meets the requirements of a CNC sliding saw. Test both sawing systems, the lower saw explosion-proof edge, feeding and pressing components, servo adjustment, and speed controls. Obtain written details for guards, emergency controls, interlocks, dust management, and alarms rather than relying on assumptions.
Foshan Sun Hunt offers customized woodworking machinery and complete production-line solutions, with a minimum order quantity of one set and a stated typical delivery period of 20-35 days. Its support information includes online technical assistance, international express dispatch of confirmed spare parts within two working days, a one-year warranty subject to stated exclusions, and sea-shipping support. Technical enquiries can be sent to vincent@fsshmachine.cn.
Foshan Sun Hunt Woodworking Machinery Co.,Ltd., also known as Foshan Sun Hunt and branded Sheng Heng or Sun Hunt, is based in Lunjiao Town, Shunde District, Foshan City. Founded in 2014, the company develops and manufactures woodworking machinery for various processing applications. It operates a stated 2,000-square-meter factory and is supported by an R&D and management team with woodworking-machinery experience. Its reported primary markets include the Middle East, North America, and Africa, with customers in several industries.

REPORT