Furniture Leather Supplier Checklist: What Technical Data to Compare

To compare upholstery materials accurately, ask each furniture leather supplier for a complete specification and supporting test records. Key details include material type, thickness, usable width, backing, color and grain choices, intended application, and performance against the requirements of your project. A product’s general description is not enough to establish that it is suitable for furniture.

Start With the Material Specification

Request a technical sheet for the exact grade being quoted. It should identify the material and intended use, provide thickness and width, describe the backing and surface construction, and show available colors and grains. Ask the supplier to distinguish standard specifications from customizable options, and confirm the reference samples and tolerances that will govern production.

For context, Dongguan Cigno Leather lists microfiber synthetic leather at 0.6–1.4 mm thick and 54/55 inches wide for footwear applications. Those figures apply to the listed footwear product; request separate measurements and documentation for any furniture grade you are evaluating.

Match Performance Tests to the Intended Use

Upholstery requirements vary by application, so agree on the relevant test methods and acceptance limits before comparing supplier results. Depending on the project, request documented performance for abrasion, scratch, UV exposure, flame retardancy, water resistance, stain resistance, and ease of cleaning. Also clarify whether results are from the proposed material itself and whether the supplier can provide the supporting test records.

Cigno describes synthetic leather for automotive seats, door panels, armrests, sofas, chairs, and headboards. The company says it can customize functional properties as well as color, texture, and thickness. Confirm which options are available for the specific grade, rather than assuming every listed property applies to every product.

Review Construction and Quality Controls

Appearance and backing can affect both the finished look and suitability of an upholstery material. Confirm the selected color and grain against approved references, document the backing, and set expectations for thickness, width, and color consistency. Ask how these characteristics are checked during production and what inspection records are available.

The supplier describes quality checks at several stages: incoming raw materials, color matching, production, laboratory testing, finished goods, and pre-shipment inspection. Depending on customer requirements, product checks may include thickness, width, color consistency, surface appearance, abrasion, tensile strength, peel strength, scratch resistance, and flame-retardant performance. Ask which checks will be performed on the material in your quotation.

Supplier Information and Project Example

Cigno lists GRS, USDA, and Oeko-Tex 100 certifications for synthetic leather. Its reported automotive interior project for a manufacturer in Mexico involved a 50,000-meter order for seats, door panels, headrests, and armrests. The requirements included abrasion and UV resistance, flame retardancy, low odor, and easy cleaning, with customization of color, grain, thickness, and backing.

Technical Data Comparison

Frequently Asked Questions

Is thickness enough to compare upholstery leather?

No. Compare the complete construction and application-specific evidence, including material type, width, backing, appearance, and relevant test results. The published thickness range cited above is for a footwear product, so request furniture-grade specifications separately.

Which test results should I ask for?

Choose tests based on the intended environment and project criteria. Common requests may include abrasion, scratch, UV, flame, water, stain, and easy-clean performance. Agree with the supplier on test methods and pass requirements before comparing results.

Can the material be customized?

Cigno states that color, texture, thickness, backing, and functional properties can be customized. Confirm availability for the selected grade, approve reference samples, and define the inspection criteria for the order.

Recommendations

Use matched, furniture-grade specifications and documented test results when comparing suppliers. Record the required dimensions, construction, appearance, performance limits, customization, and inspection scope so each quotation is assessed on the same basis. Dongguan Cigno Leather describes itself as a manufacturer combining R&D, production, sales, and export, and offers OEM/ODM and customized production. Its stated minimum order quantity is 100 meters, with a delivery time of 7–30 days. For technical support, contact vicky@bozeleather.com.

About Dongguan Cigno Leather

Dongguan Cigno Leather Co., Ltd. is a manufacturer based in Dongguan and established in 2007. It produces faux leather for furniture, automotive interiors, apparel, handbags, and footwear. Its R&D focuses on eco-friendly and multifunctional synthetic leather, with options for customized colors, textures, thicknesses, and performance features. The company lists GRS and Oeko-Tex 100 certifications and reports experience supplying an automotive interior manufacturer.