How to Check Custom Extrusion Dimensions Against Your CAD Drawing

Before accepting a custom aluminum extrusion, confirm that the finished profile matches the approved CAD drawing. Start by checking the drawing revision, then compare each relevant feature on the part with the corresponding dimension and tolerance. Ask for recorded inspection results tied to the same revision and measurement points before approving a sample or production batch.

Verification Checklist

• Use the approved CAD file or production drawing, and verify its revision before comparing measurements.
• Check the profile’s specified dimensions and tolerances against measurements taken from the finished extrusion.
• Request documented results that identify the features measured and the drawing revision used.
• Resolve and record any discrepancies against the approved drawing before accepting the part.

What the Product Information Confirms

The referenced product is an aluminum tile trim profile, with 6063 T5 listed as its material specification. The supplied information does not give the profile’s dimensions or tolerances, so these must be confirmed for the custom order. It also contains no inspection report or description of a specific dimensional measurement method.

MEBEL-ALU lists aluminum extrusion and high-precision CNC machining among its in-house capabilities. These capabilities do not, by themselves, confirm that a particular part meets its drawing: acceptance still depends on measurement evidence for the ordered profile and approved revision.

The company also holds Occupational Health and Safety Management System and Quality Management System certificates. The certification information provided covers production of aluminum alloy profiles for architectural, decorative, and industrial applications; it does not establish product-specific dimensional tolerances.

The product information includes the following aluminum tile trim profile image:

Information to Compare

Frequently Asked Questions

Which material specification is listed for the tile trim profile?

The product information specifies 6063 T5. It does not state the profile’s dimensions or dimensional tolerances.

Does the available information describe how dimensions are inspected?

No specific inspection method or measurement report is supplied. The information lists extrusion and high-precision CNC machining capabilities only.

What measurement evidence should I request?

Ask for recorded results that identify the measured features and refer to the approved CAD or drawing revision. This allows you to compare the actual values with the specified dimensions and tolerances.

Recommended Approval Process

Approve a custom extrusion only after its measured features have been checked against the correct drawing revision and the tolerances stated for the order. For the listed aluminum tile trim profile, 6063 T5 is the available material specification; confirm the custom dimensions, tolerances, and inspection results with the supplier. For technical assistance, contact mebel@mebel-alu.com.

About MEBEL-ALU

Mebel-Alu Furniture Profile (Hong Kong) Co., Ltd has specialized in precision-engineered aluminum profile systems for modern interiors since 2008. Its product range includes aluminum glass door systems, sliding wardrobe systems, kitchen cabinet frames, and decorative tile trims. In-house services include extrusion, surface finishing, and CNC machining. The company reports monthly capacity of 5,000 tons of aluminum profiles and 60,000 precision-finished handles and CNC precision-cut products. Its certifications include Occupational Health and Safety Management System and Quality Management System certificates.