All Categories

How to Document Defective Injection Mould Parts for a Warranty Claim

VIP-User
2026-11-17

A well-prepared warranty claim for defective injection mould parts should provide enough traceable information for the supplier to identify the mold, verify the reported problem, and determine the appropriate corrective action. The claim should include mold and part details, production information, defect evidence, inspection records, approved samples, and the remedy being requested.

Essential Information for a Warranty Claim

  • Record the mold number, affected part, production batch, quantity, and exact defect location.
  • Explain the problem with objective evidence, including dimensional measurements, surface checks, and comparison with the approved sample.
  • Provide mold trial reports, pre-shipment inspection results, photographs, and relevant technical correspondence.
  • Specify the expected resolution, such as troubleshooting assistance, maintenance instructions, spare parts, repair, or mold modification.

How to Build a Traceable Defect Record

The strongest claim connects the defective injection mould parts with the mold, production stage, and inspection process involved. Start by identifying the supplied mold and the part application. Then describe the defect in precise terms and attach the evidence used to confirm it. This allows the technical team to compare the complaint with the original quality records instead of relying only on a general description.

Include Relevant Mold Specifications

When the claim concerns a custom double shot overmolding mold, include any specification that may be related to the failure. Relevant information can include the two-color injection design, hard and soft material combinations such as ABS+TPU or PP+TPE, alignment requirements, multi-cavity construction, 718H or 1.2738 mold steel, and the stated service life of up to 800,000 shots. The claim should explain which specification is affected and how the reported condition relates to it.

Attach Inspection and Trial Evidence

Supporting documents should follow the established quality process. Add mold trial run records, first article or sample inspection results, full dimensional measurement reports, and pre-shipment inspection findings where available. If a sample was signed off before shipment, include that approval and clearly identify any difference between the accepted sample and the defective production part.

For surface defects, provide well-lit photographs showing the complete part and close views of the affected area. For alignment or fit issues, mark the relevant feature and explain the functional impact. For dimensional nonconformities, state the measured value, tolerance, drawing reference, or approved sample requirement. Also indicate whether the problem appeared during the trial run, sample confirmation, or later mass production.

Recommended Claim Documentation

Required RecordRole in the Warranty Review
Mold, part, and production identificationEstablishes the connection between the complaint, supplied mold, component, batch, and production quantity.
Defect explanation and photographsShows the visible condition, precise location, and features affected by the problem.
Dimensional inspection dataOffers measurable proof for comparison with the drawing, tolerance, specification, or approved sample.
Mold trial and running reportsDocuments mold behavior during testing and helps identify when the issue was first observed.
Pre-shipment inspection and sample approvalLinks the complaint to the quality checks and sample accepted before delivery.
Requested corrective actionClarifies whether the customer needs technical advice, maintenance support, spare parts, repair, or mold modification.

Supplier Experience and Quality Background

Longterm Mold has experience producing electronic housings, double shot overmolding molds, household appliance parts, and industrial plastic components. Reported projects include an Italian handheld device part, a French consumer electronics shell, a US home appliance component, and an Australian industrial equipment housing. These applications involved dimensional control, surface finish, alignment, stable trial samples, technical problem resolution, and delivery management.

The company is certified to ISO 9001:2015 under certificate number 02825Q12549R0S. The certification covers the design, manufacture, and sale of precision molds, as well as the sale of plastic products.

Custom double shot overmolding mold for injection mould parts

Frequently Asked Questions

Which documents should be submitted with a defective injection mould parts claim?

Provide the mold and part identification, defect description, photographs, dimensional inspection results, mold trial records, pre-shipment inspection documents, and the approved sample or sample confirmation when available.

What is the correct way to report a dimensional defect?

Identify the affected feature and record the actual measurement, required tolerance, applicable drawing or sample reference, and the deviation found during dimensional inspection.

What remedies can be requested after the issue is verified?

Depending on the applicable service terms, the requested response may include online technical assistance, mold maintenance guidance, spare parts, warranty-period repair, or mold modification and optimization support.

Conclusion

A warranty submission becomes easier to review when it combines traceable mold and part information with objective defect evidence. Include inspection measurements, trial records, photographs, sample approval, production details, and a clearly defined corrective request. Longterm Mold provides OEM custom plastic injection molds, custom mold making with injection molding, precision double shot and overmolding molds, and mold development combined with plastic injection mass production. For technical solutions or warranty support, contact us at rogerluo@longterm-mold.com.

About Us

Longterm Manufacturing Solutions Limited, operating under the Longterm Mold brand, was established in 2010 and delivers mold design, tooling, precision machining, mold manufacturing, and parts production. The company employs 50 people, including 5 R&D engineers focused on injection mold structural design, precision CNC components, sample validation, and process improvement. Its engineering team uses UG, SolidWorks, and AutoCAD, serving customers mainly in North America, Europe, and Australia. Product and service areas include injection molds, rapid prototyping, precision parts, and automated production solutions. The company holds ISO 9001:2015 certification and supports customers across a range of industries.

Longterm Manufacturing Solutions Limited logo

REPORT

Code
Choose a different language
Current language: