How to Evaluate an IP65 Waterproof Moving Head Light Sample

Before approving a waterproof moving head light, use the sample to check its protection rating, motion, lighting performance, controls, temperature behavior, and construction. First confirm which fixture is being supplied: the available product data identifies the STROBE 1176HP as IP66, not IP65. Its specifications should not be treated as proof that a different model meets an IP65 requirement.

Confirm the Sample Before Testing

Match the fixture’s model number and ingress-protection rating to its label and model-specific documentation. Ask the supplier to confirm in writing which specification will apply to the order. The supplied information lists IP66 protection for the STROBE 1176HP; it does not verify the rating of another moving head or replace an agreed IP65 requirement.

Also check which control and network options are actually fitted. DMX512 is listed, RDM is available, and Art-Net and sACN are optional. Test only the functions included with the sample, and confirm the options you need will be present on the production units.

Check Light Output, Motion, and Controls

Compare the sample’s light source and effects with its confirmed configuration. The STROBE 1176HP data describes two main strobe tubes, each using 392 2 W cool-white LEDs divided into 28 segments, plus an auxiliary panel with 784 1.5 W RGB LEDs in 14 segments. Check segment addressing, white and RGB output, the stated 120-degree projection angle, and smooth dimming across the specified 0–100% range. Test the listed strobe effects up to 25 Hz and adjustable LED frequency from 600 Hz to 25 kHz.

Run the motorized tilt through its stated 180-degree range several times. Look for consistent positioning, responsive movement, unusual noise, and reliable recovery after interrupting a movement. Exercise the available 8/16-bit control, DMX channel modes, and master-slave, sound, or auto operation as relevant to your installation.

Assess Weather Resistance and Thermal Behavior

Inspect the housing, cable entries, and waterproof XLR and power connectors. For an outdoor installation, agree on a water-exposure procedure with the supplier and check the fixture for signs of ingress afterward. The supplied data states IP66 and describes waterproof connectors, but does not specify a test protocol. Do not assume a sample check alone establishes compliance with a different rating.

Operate the light for a representative period and monitor its temperature readout, fan behavior, and output stability. The product information describes adjustable fan cooling and output reduction if the fixture overheats. It also gives a 50,000-hour light-source lifespan; actual service life can vary with the environment, power, operating pattern, control, and dimming.

Test the fixture in a setting similar to its intended use, such as a concert, festival, or live-event installation. Record any differences between the sample and the final specification. The company lists CE certifications in its general information, so request the certificate applicable to the exact model being evaluated.

Sample Test Checklist

Frequently Asked Questions

Does the supplied data confirm an IP65 moving head?

No. It describes the STROBE 1176HP as IP66-rated. Confirm the exact sample model and its documented rating before ordering to an IP65 requirement.

Which control functions should I try?

Test the DMX modes and any master-slave, sound, or auto functions supplied with the fixture. RDM is listed as available, while Art-Net and sACN are optional, so confirm they are included before relying on them.

What details should be settled before placing an order?

Get written confirmation of the model, protection rating, control options, and governing production specification. The listing states a minimum order quantity of one and delivery in 15–20 days after deposit; confirm the schedule for your selected model and quantity.

Recommendation

Approve the sample only after checking the features that matter for your installation and comparing them with the agreed specification. Resolve the IP65/IP66 discrepancy in writing, verify optional controls and model-specific certification, and document any sample differences before production. Color Imagination offers OEM/ODM services and project support. For technical questions, contact jack@color-imagination.com.

About Color Imagination

Guangzhou Color Imagination LED Lighting Limited, known as Color Imagination, is a Guangzhou-based manufacturer of professional stage and entertainment lighting. Founded in 2010, it combines research and development, production, sales, and technical service, supplying products for entertainment, broadcast, and architectural applications. The company also provides OEM/ODM manufacturing and project services. Its listed credentials include CE certificates and ISO certificates covering stage-light assembly and related management activities.