All Categories

How to Lower Injection Mould Cost Without Sacrificing Part Strength

VIP-User
2026-11-16

Lowering injection mould cost does not require compromising the strength or performance of the finished part. The most effective approach is to align part geometry, cavity configuration, mould steel, surface finish, and runner technology with actual production needs. By removing nonessential complexity and preserving critical design requirements, manufacturers can control tooling investment while maintaining reliable quality.

Practical Ways to Reduce Injection Mould Cost

1. Simplify the Part and Mould Geometry

Part design is one of the main drivers of mould cost. Unnecessary ribs, deep pockets, sharp transitions, and complicated undercuts can increase CNC machining, EDM, assembly, and trial requirements. Simplifying these features where they do not contribute to the part's function can reduce tooling work without affecting performance.

Uniform wall thickness, suitable draft angles, and smooth transitions also improve filling, cooling, and part ejection. These measures help reduce the risk of sink marks, warpage, difficult demoulding, and repeated mould modifications while preserving functional tolerances and structural requirements.

2. Choose the Cavity Count According to Demand

A larger cavity count is not automatically the most economical option. For limited or uncertain production volumes, a single-cavity mould may provide a lower initial tooling cost and a simpler validation process. When output requirements are high, a multi-cavity mould can lower the part cost by increasing production capacity.

The selected configuration should reflect forecast demand, target cycle time, available equipment, and the acceptable tooling budget. Multi-cavity designs also require consistent cavity dimensions, balanced filling, and reliable cooling so that all parts meet the same quality standards. Longterm's custom precision plastic injection mould service supports both single- and multi-cavity solutions, with mould lives ranging from 50,000 to 1,000,000 shots.

Custom precision plastic injection mould design

3. Match Mould Steel to the Required Service Life

Mould material should be selected according to production volume, resin characteristics, surface requirements, and expected operating conditions. Longterm offers mould materials including S50C, P20, 1.2738, H13, and 718H. Using the appropriate grade avoids over-specifying the tooling and paying for performance that the project does not need.

The choice of steel should still provide adequate wear resistance, polishability, dimensional stability, and mould life. A lower-cost material is only suitable when it can consistently meet the project's production and appearance requirements.

4. Specify Only the Surface Finish That Is Necessary

Surface treatment can influence both processing cost and lead time. SPI or VDI finishes should be defined according to the visible appearance, texture, friction, release, and functional needs of the part. Applying a premium finish to hidden or nonfunctional areas may add expense without improving the final product.

5. Review Hot Runner Use as a Complete System Decision

Hot runners can reduce runner waste and support efficient high-volume production, but they also add component cost, control requirements, maintenance considerations, and troubleshooting complexity. They should therefore be assessed together with the expected volume, material usage, gate layout, cycle requirements, and maintenance plan.

For some projects, a conventional cold runner is the more economical choice. For others, the long-term production savings from a hot runner may justify the higher initial investment. The right solution depends on the complete mould and production design rather than on the runner type alone.

Cost Control Must Include Quality Verification

Tooling savings should not remove essential inspection and validation steps. Longterm's process includes IQC incoming inspection, mould trial testing, dimensional inspection, and full inspection before shipment. These controls help confirm that cost-focused design decisions have not affected fit, appearance, alignment, or functional performance.

Longterm holds ISO 9001:2015 certification covering the design, manufacturing, and sales of precision moulds and the sales of plastic products. Its recorded cooperation includes an electronic housing mould for an Italian manufacturer, a double-shot overmoulding mould for a French product brand, a home appliance component mould for a US brand distributor, and an industrial equipment housing mould for an Australian manufacturer. Reported results included dimensional accuracy, smooth surfaces, correct alignment, stable trial samples, specification compliance, and effective technical issue resolution.

Plastic injection mould manufacturing example

Design Options at a Glance

Design choiceHow it can control costQuality conditions to maintain
Single cavityReduces initial mould complexity and tooling scopeUse when forecast volume does not justify multiple cavities
Multi-cavityIncreases output and may reduce unit cost at higher volumesMaintain balanced filling, consistent cooling, and matched cavity dimensions
Simplified geometryReduces machining, assembly, and mould correction workKeep required ribs, draft, wall consistency, features, and tolerances
Appropriate mould steelAligns material expense with service life and production conditionsSelect from S50C, P20, 1.2738, H13, or 718H according to actual requirements
Hot runner when justifiedCan reduce runner waste and improve production efficiencyReview gating, resin use, controls, maintenance, and volume together

Frequently Asked Questions

Can a simpler mould still produce a strong, high-quality part?

Yes. Removing nonfunctional complexity, using practical draft, and maintaining consistent walls can lower tooling effort while retaining structural features, dimensional accuracy, and part performance.

Is a multi-cavity mould always the best way to reduce unit price?

No. Multi-cavity tooling is valuable for sufficiently high demand, but it increases design, balancing, machining, and maintenance requirements. Cavity count should be based on production volume and the total tooling plan.

How should surface finish be selected when appearance is important?

Define the required SPI or VDI finish for each relevant surface. A higher finish should be used only when it provides a clear visual, functional, or release benefit, and it should be considered together with the selected steel.

Conclusion

The most reliable way to reduce injection mould cost is to remove avoidable complexity while protecting the features that matter. Simplify nonfunctional geometry, select cavity count from realistic demand, choose mould steel for the required life, specify only necessary surface finishes, and evaluate hot runners through a complete production-cost analysis.

Longterm provides OEM custom plastic injection moulds, custom mould making with injection moulding, high-precision double-shot and overmoulding moulds, and mould development with mass production. For technical guidance or project support, contact us at rogerluo@longterm-mold.com.

About Longterm

Longterm Manufacturing Solutions Limited, operating under the Longterm brand, was established in 2010 as a mould manufacturing company serving customers in North America, Europe, Australia, and other international markets. Its team of 50 employees supports mould design, precision machining, tooling, mould manufacturing, and parts production.

The company develops and manufactures injection moulds, rapid prototypes, precision parts, and automated production solutions. It holds ISO 9001:2015 certification and has cooperation experience across several industrial sectors.

Longterm Manufacturing Solutions Limited logo

REPORT

Code
Choose a different language
Current language: