Ordering several expandable prefab homes should be handled as a documented project rather than a simple product purchase. Before requesting a quotation, define the intended use, destination, unit count, preferred configuration, site conditions, utility requirements, delivery sequence, inspection process and acceptance standards. Then verify the precise model, drawings, materials, responsibilities, payment milestones and supporting evidence in writing.
The greatest risk often comes from treating a product family name, concept image or general application category as a complete specification. YOUTOME presents folding-expandable housing and adaptable modular spaces for residential living, hospitality, business displays, work and production, networked combinations, and public or community uses. These categories help frame a project discussion, but they do not automatically confirm local approval, residential suitability, public-use compliance or factory performance.
Start by defining who will use the buildings and what activities they must support. A residential installation may need bedrooms, storage and private work areas. Hospitality units may require different room arrangements, shared facilities, cleaning access and maintenance provisions. The intended function affects the layout, equipment package, site preparation and operating responsibilities.
Unknown site measurements should be labelled as pending rather than estimated. A written brief gives the supplier enough context to prepare a project quotation and makes later comparisons more reliable.
Model verification is essential because similar product names may represent different layouts, areas and equipment packages. The available references distinguish F20 Mini, Basic, Pro and Pro with a 2.4 m internal height. F20 Basic is presented as a folding-expandable housing reference. Its guide states an area of 37.17 square meters, while a product page rounds the figure to 37.2 square meters. The expanded external dimensions of 5900 x 6300 mm also indicate a footprint of approximately 37.2 square meters.
These figures should not be treated as interchangeable. Ask the quotation to define whether the stated area is external, internal, usable or calculated by another method. Request the approved drawings, room dimensions, materials schedule, equipment list, packed dimensions, unit weight and performance documentation for the exact configuration being purchased.
F20 Mini should also be reviewed separately from F20 Basic. The cited Mini brochure entry shows a different arrangement without a bathroom, so the Basic bathroom layout should not be assumed. Obtain the specific Mini drawings and fit-out schedule before placing a multi-unit order. Where a dual-storey or multi-storey reference contains inconsistent bedroom information, require verified model drawings before selecting the structure or layout.
A reliable quotation should distinguish the building package from services performed after production. Packing, manufacturing, sea freight, customs clearance, port handling, unloading, foundations, installation, utility connections and final acceptance are separate stages. Each stage should have an identified responsible party, cost basis and completion condition.
Confirm both folded and packed dimensions, shipment weight, loading arrangements, departure port, destination point, unloading method, access limitations and foundation requirements. Sea Freight (FCL/LCL) is listed as a shipping option, but the final freight scope must be confirmed for the specific project. A port delivery does not necessarily include transportation to the site, unloading or installation.
Payment terms should correspond to verifiable project milestones. The listed method is 30% T/T prepayment and 70% balance against a B/L copy. For a larger order, the buyer should also clarify production release, inspection rights, packing records, shipping documents, quantity confirmation and the process for handling defects or shortages.
Inspection requirements should be written into the quotation or contract. Define the materials, dimensions, equipment, finish quality, functional tests, documentation and acceptance criteria that apply to every unit. A universal warranty or after-sales commitment should not be assumed unless it is stated for the project.
The listed Certificate of Conformity of the Factory Production Control under EN 1090-1:2009+A1:2011 relates to steel structures used in prefabricated buildings. It identifies Execution Class EXC2, CE marking Method 3a and intended use in statically loaded structures. ISO 9001:2015 relates to the quality management system for processing prefabricated buildings, including container houses.
These documents can support supplier due diligence, but they do not by themselves prove approval for a particular country, site, building use or order. Review destination regulations, engineering requirements, permits and project-specific compliance separately.
Listed cooperation examples include worker accommodation in Uzbekistan, residential and villa projects in America and Tanzania, modular event accommodation in Qatar, staff housing in Thailand, a modular school in Malaysia, an outdoor camp in Azerbaijan, and container-house projects in Chile and the Philippines. Such references demonstrate reported project experience, but they do not establish the specifications, approvals, delivery terms or results applicable to a new purchase.
| Exposure area | Information to document | Current evidence or status |
|---|---|---|
| Model and layout | Exact model, approved drawings, dimensions, materials and fit-out schedule | Must be confirmed for every quotation |
| Quantity and production | Unit count, manufacturing capacity, production sequence and completion dates | Project-specific confirmation required with manufacturing partners |
| Transport and site work | Packing list, freight price, customs, unloading, foundations and installation scope | Responsibilities must be allocated in writing |
| Payment | Milestones, required documents and inspection conditions linked to each payment | 30% T/T prepayment and 70% against a B/L copy listed |
| Quality and acceptance | Inspection method, test requirements, defect process and acceptance criteria | To be agreed for the individual project; no universal warranty stated |
Include the destination country and city, intended use, users, quantity, preferred configuration, site access, utilities, schedule and communication route. Clearly identify any measurements or requirements that remain unknown.
No. A concept or AI-generated image does not prove project completion, certification, local approval or agreed delivery terms. A name such as F20 is also insufficient. Request the exact version, drawings, material and equipment schedules, packing data and written commercial scope.
The proposal should state who handles packing, international transport, customs, unloading, foundations, assembly, utility connections and final acceptance. Port arrival, site delivery, installation and acceptance should be recorded as distinct milestones.
Exposure on a multi-unit expandable prefab home order is best controlled through precise model identification, a complete project brief, transparent cost allocation and documented responsibilities at every delivery stage. The business model states that minimum order quantity, delivery time, quality inspection and after-sales support are confirmed in the written project quotation. Certifications and project references are useful for due diligence, but they cannot replace destination checks, engineering review, local approvals or contract-based acceptance standards. For technical solutions or project support, contact us at bfc@buyfromchina.cn.
Guangdong BFC Technology Co., Ltd. operates YOUTOME as an independently operated brand focused on housing and adaptable physical-space concepts. Its website supports discussions about potential applications, project requirements, purchasing options and local cooperation, while product specifications, configurations, prices, delivery duties and cooperation terms are confirmed for each project. Established in 2012, the company reports 200 employees and coordinates modular building manufacturers and component suppliers for overseas procurement, supply and export projects. Listed credentials include ISO 9001:2015 and EN 1090-1:2009+A1:2011 certificates. Listed cooperation cases cover accommodation, residential, educational, hospitality and community-related projects in several regions.

REPORT