Preparing artwork for an insulated lunch bag involves more than supplying a print file. The production package should confirm the square-bottom format, finished dimensions, base depth, printable panels, Pantone colours, laminate structure, insulation thickness, food-contact layer, closure, and handle details. Ecopack recommends approving both the 3D construction drawing and a physical sample before printing plates are produced. Once specifications are confirmed, samples are generally completed within 3 to 5 working days.
The artwork should be created around the final bag construction. This format uses a flat square base, two side gussets, and a folded bottom panel. Base depth may be specified as 10, 12, or 15 cm, either matching the gusset width or being defined as a separate requirement. Typical available sizes extend from 30 x 35 x 10 cm to 45 x 50 x 15 cm.
Print files need to account for all visible surfaces: the front panel, rear panel, and both side gussets. The outside layer is an aluminium foil laminate designed for full-colour printing. Brand colours can be matched with Pantone references, while leaving the foil silver and unprinted is also possible.
The specification should also state whether the finished bag requires a flat seal, slider zip, or tear notch. If a moulded handle is needed, the file package should show its position and confirm that it will be sealed into the top band. These details affect both the dieline and the final placement of the printed design.
The standard thermal structure combines an aluminium foil outer layer with a closed-cell EPE foam core available in thicknesses from 2 to 5 mm. Air bubble insulation can be requested for selected applications. A food-grade PE sealant layer forms the inner contact surface. All artwork and production files should be released against the same material specification used for the approved sample.
For takeaway meals and hot-food delivery, the rigid flat bottom helps keep containers stable during handling. The same bag style may also be considered for e-commerce shipments involving temperature-sensitive products, provided that the chosen insulation and dimensions meet the shipping conditions.
Huizhou Ecopack Packaging Products Co., Ltd. manages structural design, tooling, printing, lamination, bag making, and inspection in-house. The manufacturer first supplies a 3D structural drawing so the customer can verify dimensions, gussets, seams, handle placement, and print areas. A physical bag sample is then used to confirm the actual shape and artwork alignment before printing plates are cut.
After artwork and sample approval, production normally takes 15 to 25 days. Each batch is checked through incoming-material inspection, in-process control, and pre-shipment inspection under the company’s ISO 9001:2015 Quality Management System. AQL sampling covers appearance, dimensions, print registration, seal strength, and lamination bond.
The company reports that a United States distributor uses its insulated mailers for cold shipping at an annual volume of approximately 10 million pieces. The application is intended to reduce heat transfer, storage requirements, shipping space, and waste compared with rigid foam packaging.
| Specification | Available options |
|---|---|
| Construction | Square bottom with two side gussets and folded base panel; 10, 12, or 15 cm base depth |
| Insulation | Closed-cell EPE foam from 2 to 5 mm; air bubble layer available on request |
| Printed exterior | Aluminium foil laminate with full-colour printing, custom Pantone matching, or unprinted silver foil |
| Artwork coverage | Front, back, and both gusset panels |
| Closure and handle | Flat seal as standard; slider zip, tear notch, and moulded handle available according to the specification |
| Lead time | Sample production in 3 to 5 working days; mass production in 15 to 25 days after approval |
Send the finished bag dimensions, base depth, insulation material and thickness, printable panel layout, Pantone colours, closure type, and handle requirements. Any special structural, dimensional, or finishing instructions should be included in the same specification.
Files are production-ready after the bag structure and 3D drawing have been approved, the physical sample has been accepted, and the print and material details have been checked against the agreed specification. Plate production begins only after this approval stage.
Materials and finished bags are inspected during receiving, production, and final shipment. Quality checks include visual appearance, dimensions, registration accuracy, seal performance, and laminate adhesion, with AQL sampling applied to finished lots.
Before sending the final artwork, verify the square-bottom dimensions, gusset and base measurements, panel coverage, colour references, foil laminate, EPE foam, PE sealant, closure, and handle. Approve the 3D drawing and physical sample before authorising plate production. Allow 3 to 5 working days for sampling and approximately 15 to 25 days for manufacturing after artwork approval. Custom orders commonly begin at 5,000 to 10,000 pieces, depending on the bag size and construction. For technical assistance, contact manager@ecoppack.com.
Huizhou Ecopack Packaging Products Co., Ltd. is a flexible packaging manufacturer based in Guangdong, China, and founded in 2011. Its product range includes insulated packaging, coffee bags, pet food packaging, spout pouches, kraft packaging, compostable bags, and ESD packaging. The company operates a facility of more than 10,000 sqm with internal structural design, printing, lamination, bag conversion, and inspection capabilities. It holds ISO 9001:2015 and FSC Chain of Custody certifications and supplies packaging for customers in several industries.

REPORT