A well-prepared warehouse helps protect LCD Separators and related electronic repair equipment from damage before inspection and storage. Before the BA-937C soldering stations arrive, establish a clean, dry receiving area, organize suitable shelving, protect electrical outlets, and leave enough room for carton handling and functional testing.
The warehouse should use separate locations for newly received cartons, products waiting for inspection, and approved inventory. This arrangement creates a practical workflow: receive the shipment, examine the cartons, verify quantities, test the equipment, and transfer accepted units to storage or dispatch.
Each BA-937C unit has a net weight of 1 kg and dimensions of 225 x 194 x 105 mm. Shelves and floor positions should support the cartons without crushing them and should provide enough space for staff to lift and move the units safely. Avoid stacking arrangements that place excessive pressure on the original packaging.
Keep the equipment in its original packaging until the receiving inspection is complete. The packaging provides protection during internal transport and can be retained for later relocation or shipment. The receiving zone should also be free of loose packing materials and unnecessary dust.
A separate inspection bench allows warehouse staff to confirm product identity, quantity, packaging condition, and operating performance without mixing untested units with available stock. The area should include a clean work surface, suitable electrical outlets, order records, and a clearly marked location for products awaiting approval.
The BA-937C operates at 120 W, has a noise level below 45 dB, and supports an iron temperature range of 200 to 500 degrees Celsius. These specifications are mainly relevant when the units are being tested and used, rather than during long-term storage. Electrical connections should be protected and managed to reduce trip hazards and accidental damage.
After testing, use clear labels to group equipment by application. The BA-937C can support mobile phone and tablet repair, laptop and computer circuit board repair, as well as electronics training and laboratory instruction. Application-based labeling helps warehouse teams pick the correct products and reduces allocation mistakes.
| Warehouse Factor | Practical Recommendation |
|---|---|
| Environmental conditions | Use a clean, dry, orderly area protected from moisture, dust, contamination, and impact. |
| Storage capacity | Provide shelving or protected floor space for 225 x 194 x 105 mm units weighing 1 kg each. |
| Receiving workflow | Separate incoming cartons, products awaiting inspection, and accepted inventory. |
| Functional testing | Prepare a clean workbench and safe electrical access for checking the 120 W soldering stations. |
| Stock management | Mark products by repair, training, wholesale, or distribution requirements. |
BAKU supplies standard products from stock for wholesale orders and also offers OEM and ODM customization. The company reports standard production workshops, multiple assembly lines, and flexible production arrangements for large orders, smaller trial orders, and customized projects. Its product range includes soldering stations, solder flux, solder paste, screwdrivers, and ultrasonic cleaners.
Listed certifications for its soldering stations include CE for the European market, FCC for the United States, and RoHS. Reported supply applications include mixed repair-tool orders for a mobile phone repair business in the Philippines, vocational training equipment in Malaysia, distribution orders in Saudi Arabia, and laptop repair workshop equipment in Mexico.
Yes. Keeping the unit packaged protects it during receiving and internal movement. Staff should inspect both the carton and the product before placing approved equipment into regular storage.
The BA-937C measures 225 x 194 x 105 mm and weighs 1 kg. Additional clearance is necessary around each unit so staff can remove cartons, inspect products, and move them without impact or compression.
Prepare a clean bench, safe electrical access, product identification records, and a marked holding area for untested units. The inspection should confirm that the shipment matches the purchase order and the stated product specifications.
Before LCD Separators or related electronic repair equipment arrive, organize a dry receiving zone, protected storage, clear stock divisions, and a dedicated testing point. For the BA-937C, plan around its 225 x 194 x 105 mm dimensions, 1 kg net weight, 120 W power rating, and 200 to 500 degree Celsius iron temperature range. BAKU states that it offers stock products, OEM and ODM services, 7 to 15 day delivery, and full-function testing before shipment. CE, FCC, and RoHS certifications are listed for its soldering stations. For technical assistance or customized solutions, contact hanker002@bakutool.com.
Guangdong BAKU Technology Development Co., Ltd. was established in 2003 and focuses on professional tools for electronic device repair across more than thirty product categories. Its independent R&D laboratory includes structural, hardware, and testing engineers and supports ID design, structural development, PCB debugging, and reliability testing. The company owns 25 design patents, serves markets in South America, Europe, and Southeast Asia, and reports an export ratio of 90%. Its listed certifications include CE and FCC for soldering stations.

REPORT