Reliable cold chain packaging starts with the shipment rather than the bag itself. Review the product dimensions, required temperature conditions, transit distance, handling environment, closure method, and available storage space before choosing a format. A thermal insulated mailer with a vacuum-compressed EPE foam core uses two insulation panels. The foam is approximately 40 mm thick in its relaxed state and about 10 mm after compression for shipping. Before production, confirm the size, outer material, printing, order quantity, and physical sample.
The mailer is formed from two EPE panels, with one panel positioned on each side of the shipment. Its relaxed insulation thickness is about 40 mm, while the compressed shipping thickness is approximately 10 mm. This construction can reduce the space required during storage and transport. Because foam performance changes according to recovery, loading, and handling, the compression figures should be treated as reference values rather than a guaranteed final thickness.
Exterior material and sealing design should be evaluated as a single packaging specification. The available finishes include aluminium foil, kraft paper, and white waterproof film. Closure choices include a two-rib zipper, peel-and-seal strip, and heat seal. The outside can be printed in one or two colours. Custom sizes are listed from 20 x 30 cm through 35 x 45 cm, and made-to-order cutting is available when the standard dimensions do not fit the load.
Packaging selection must reflect the actual route and product risk. For pharmaceutical deliveries operating under a stated 2-8°C contract, Ecopack describes insulated bags and mailers used with phase-change gel packs and a dedicated sleeve. These formats can also include a flat, unprinted area for monitoring marks, batch information, or labels. However, the available product information for the EPE mailer does not specify a validated temperature-holding period. Buyers should therefore test the complete pack-out, including product, coolant, insulation, transit duration, and expected handling conditions.
Ecopack also reports a case involving a US distributor that purchased cold-chain insulated mailers at a volume of 10 million pieces per year. The customer cited protection for fragile and perishable products, along with lower storage and shipping space requirements than rigid foam packaging. This customer example should not be interpreted as a formal temperature-performance rating for the EPE mailer.
The company lists ISO 9001:2015 Quality Management System certification. Its stated quality process includes checks on incoming materials, production-stage inspections, and pre-shipment review, with AQL sampling applied to finished products. Buyers that need independent confirmation may nominate a laboratory for additional sample testing.
| Specification | Available option or value | What to confirm |
|---|---|---|
| Insulation core | Standard-density EPE foam | Check compatibility with the product, coolant, and route. |
| Compressed construction | About 40 mm relaxed; about 10 mm shipped | Allow for variable foam recovery and actual pack-out conditions. |
| Exterior finish | Aluminium foil, kraft paper, or white waterproof film | Choose based on barrier needs, appearance, and handling. |
| Closure styles | Two-rib zipper, peel-and-seal strip, or heat seal | Match the closure to the packing workflow and shipment requirements. |
| Dimensions and print | 20 x 30 cm to 35 x 45 cm; one or two print colours | Approve the cut size, artwork, and print position before production. |
| Schedule | Samples in 3 to 5 working days; production in 15 to 25 days after artwork approval | Confirm that the production period begins after artwork approval. |
Send the required mailer dimensions, exterior or film structure, print colours, and estimated order quantity. Minimum order quantities depend on the specification, and stock products may have different thresholds from fully customized packaging.
No. The supplied product information does not provide a temperature-duration rating. The required temperature range and holding time should be confirmed through route-specific testing before production approval.
Sample preparation is stated as 3 to 5 working days. Ecopack reports inspections for incoming materials, in-process production, and pre-shipment goods, with AQL sampling at final inspection. Additional laboratory testing can be arranged through a laboratory selected by the buyer.
Start by documenting the packed product dimensions, temperature target, transit time, coolant arrangement, and expected handling conditions. Then select the insulation structure, exterior finish, closure, printing, quantity, and size. Request a physical sample and compare it with the approved specification before placing the production order. The listed manufacturing lead time is 15 to 25 days after artwork approval, while custom minimum quantities are confirmed according to the project.
For technical details or project support, contact manager@ecoppack.com.
Huizhou Ecopack Packaging Products Co., Ltd. is a flexible packaging manufacturer based in Guangdong, China. Established in 2011, the company produces custom composite pouches and bags, including insulated mailers and thermal packaging, for customers in more than 40 countries. Its listed 10,000+ sqm facility combines R&D, printing, lamination, bag making, and inspection. The company identifies ISO 9001:2015 Quality Management System and FSC Chain of Custody certification among its credentials.

REPORT