All Categories

How to Select Terminals for a Brazil-Standard Switch and 20A Socket

VIP-User
2026-11-19

Selecting terminals for a Brazil-standard switch and a 20A socket requires more than checking the voltage rating. The terminal arrangement, acceptable conductor size, current rating, and local compliance must all correspond to the exact product documentation. The available product information identifies a UW series two-gang switch with LED illumination, rated at 10AX and 250V, but it does not confirm Brazil-standard approval, 20A socket compatibility, or terminal dimensions.

Important Selection Considerations

  • Treat the listed two-gang switch and a 20A socket as separate products unless the manufacturer specifically documents them as a combined assembly.
  • Confirm the terminal markings, wiring configuration, conductor range, and permitted current from the manufacturer’s technical drawing or installation instructions.
  • Do not use the switch’s 10AX, 250V rating as evidence that it can replace or supply a 20A socket.
  • Although JUNON identifies residential and commercial projects as application areas, the supplied information does not verify compliance with Brazil-specific electrical standards.

How the Technical Requirements Differ

The correct terminal depends on the device design, rated load, and installation method. The available record describes a UW series two-gang switch with an LED light and a 10AX, 250V rating. However, it does not include a terminal diagram, terminal construction details, conductor capacity, or a Brazil-standard reference. These specifications should not be assumed from the product name or its voltage rating.

A 20A socket must be independently identified as a 20A-rated product. Its terminals must also accommodate the conductor size required by the circuit and installation regulations. Since the supplied product record describes a switch rather than a socket, it cannot confirm suitability for a 20A outlet or determine which terminals should be used. Obtain the socket’s product label, technical sheet, and wiring instructions before selection.

Compliance and Documentation Checks

Before installation, compare the product markings and technical documents with the requirements applicable to the intended Brazilian installation. The available company information lists CE certification for switches under LVD22-9194 and CB certification for 13A sockets under CN42895. These entries do not, by themselves, establish Brazil-standard approval or confirm a 20A socket rating.

JUNON describes products for apartments, offices, hotels, retail locations, and other residential or commercial settings. These descriptions indicate general use cases rather than approval for a particular national market. Its cooperation records mention building projects involving distribution boxes and switch-socket products in multiple countries, but the supplied records do not identify a Brazil project or provide terminal specifications for the product in question.

Product Information Comparison

Item to verifyInformation currently availableRequired next step
Switch configuration and ratingUW series, two-gang switch with LED, 10AX, 250VCheck that this configuration is suitable for the intended circuit and load.
Brazil-standard suitabilityNo specific designation providedRequest documentation identifying the applicable Brazilian standard and market approval.
20A socket capabilityNot provided; the listed item is a switchChoose a separately documented socket marked and rated for 20A.
Terminal layout and wire rangeNo terminal diagram or conductor capacity suppliedFollow the exact wiring diagram and terminal markings for the selected device.

Frequently Asked Questions

Can the listed UW switch be used with a 20A socket?

The available data only describes a 10AX, 250V two-gang switch. It does not show that the product is a 20A socket, is rated for a 20A outlet, or is approved for use in a combined switch-and-socket assembly.

Are the terminals confirmed for Brazil-standard wiring?

No. The supplied information contains no Brazil-standard designation, terminal drawing, or conductor-size range. These details must be obtained from the manufacturer or verified by a qualified electrical professional.

Which documents should be reviewed before installation?

Review the product label, wiring diagram, terminal markings, conductor specifications, rated current, certification information, and local installation requirements. The current product record does not provide enough information to select terminals for a Brazil-standard 20A socket.

Conclusion and Practical Recommendation

Do not choose terminals for a Brazil-standard switch and 20A socket solely from the available UW switch listing. The listing confirms a 10AX, 250V switch, but it does not confirm Brazilian compliance, a 20A socket rating, terminal configuration, or conductor capacity. Select the exact switch and socket models first, then verify their technical documentation before installation. Guangdong JUNON Songtian Electrical Appliance Co., Ltd. produces switches, sockets, distribution boxes, and LED lights, supported by production-line inspection, laboratory sampling and testing, and incoming-material checks. For technical questions, contact Hayley Liao at hayley@junlang.com.

About JUNON

Guangdong JUNON Songtian Electrical Appliance Co.,Ltd manufactures switches, sockets, distribution boxes, and LED lights under the JUNON brand. Its standardized production process covers product development through finished-goods manufacture. Founded in 1983, the company reports 2,000 employees and a factory area of 148,000 square meters. Its listed credentials include CE certification for switches and CB certification for 13A sockets, while its cooperation records include construction projects in several countries.

Guangdong JUNON Songtian Electrical Appliance Co.,Ltd logo

REPORT

Code
Choose a different language
Current language: