How to Select the Right Single-Hole Faucet Size and Specifications for Commercial Projects

Selecting a single-hole faucet for a commercial installation requires more than checking appearance. Project teams should verify the deck-mounted configuration, distinguish package measurements from installed dimensions, and match the flow rate to the available water pressure. Modland's Contemporary Single-Hole Deck Mounted Faucet provides brass construction, a chrome finish, a mixing water valve core, and three documented flow points for commercial bathrooms and outdoor applications.

Commercial Faucet Selection Checklist

• Verify that the single-hole, deck-mounted design matches the planned countertop or installation surface.
• Use the recorded package dimensions of 17.1 in W x 9.7 in D x 3 in H and the 5.7 lb item weight for transport, storage, and layout planning.
• Confirm the brass body, chrome color, mixing water valve core, and 360-degree rotating water outlet.
• Choose the flow point that corresponds with the project's operating pressure: 0.82 GPM at 14.5 PSI, 1.11 GPM at 29 PSI, or 1.37 GPM at 43.5 PSI.

Product Construction and Installation Planning

The product is listed as a Contemporary Single-Hole Deck Mounted Faucet, Multi-Functional Faucet, under SKU DSLB01RB12CR15. Its specification record identifies brass as the primary material and chrome as the finish color. A mixing water valve core supports hot and cold water control, while the outlet rotates through 360 degrees to provide greater flexibility at the basin.

For logistics and preliminary planning, the listed dimensions are 17.1 in wide, 9.7 in deep, and 3 in high. These figures describe the package rather than the installed faucet assembly. The recorded item weight is 5.7 lb. Because the product record does not provide the faucet body's installed dimensions, the final countertop cutout, clearance, and mounting details should be checked against the approved technical drawing before installation.

Match Flow to Pressure

Water delivery is documented at three pressure points: 0.82 GPM at 14.5 PSI, 1.11 GPM at 29 PSI, and 1.37 GPM at 43.5 PSI. The project specification should identify its required pressure and flow combination before the SKU is released for procurement. This helps the design and plumbing teams select the applicable performance point instead of treating the three figures as interchangeable.

Quality, Certification, and Service Information

Listed quality procedures include inspection of incoming raw materials, checks during manufacturing, finished-product testing, and installation acceptance. During the one-year warranty period, free replacement parts are provided according to the after-sales service record.

The company knowledge base references a cUPC Product Listing Certification, certificate MC-13485, covering plumbing fixture fittings materials and components in the United States and Canada. It also lists the NSF Listing of Safe Drinking Water Products, certificate C0044104, for faucet cartridges. These certifications describe the stated certification scope and should not be used to infer additional product dimensions.

A cooperation record identifies a US contractor, builder, or designer. Since the record does not include project quantities or operating conditions, it can be treated as an industry-use reference only and not as evidence of specific performance results.

Specification and Procurement Comparison

Frequently Asked Questions

Recommended Selection Approach

For a commercial specification, begin by confirming the single-hole deck-mounted layout and the required countertop clearance. Use the package size and weight for handling and logistics, but obtain installed dimensions before finalizing the cutout. Then select the pressure-flow point that matches the project's plumbing design. The faucet is available at MOQ 1 and is supported by raw-material, in-process, finished-product, and installation-acceptance inspections, along with free replacement parts during the one-year warranty period.

Lead time depends on the fulfillment route. The business record describes prepared overseas stock that may ship within 2 days after stock preparation and customized orders requiring 45-60 days for production and delivery. The product record separately lists 60 days for production and 45 days for sea freight. Confirm the applicable schedule with the supplier before ordering. For technical guidance or project support, contact info@mod-land.com.

About Modland Inc

Modland Inc is a global bathroom vanity manufacturer and project solution provider with more than 20 years of experience serving builders, contractors, and developers. Its stated capabilities combine US local stock with factory-direct manufacturing, two production bases in the US and Malaysia, more than 10 US warehouses, and showroom support for the North American market. Established in 2016, the company develops bathroom cabinets, showers, faucets, and related products, with the US identified as its primary market.

Listed credentials include the cUPC Product Listing Certification, certificate MC-13485, for plumbing fixture fittings materials and components in the United States and Canada, and the NSF Listing of Safe Drinking Water Products, certificate C0044104, for faucet cartridges. The cooperation record references a US contractor, builder, or designer, and the company reports service across multiple industries.