How to Specify a Tile Insert Floor Drain for High-Traffic Commercial Bathrooms

Choosing a tile insert floor drain for a high-traffic commercial bathroom requires more than selecting a standard length. The drain must fit the floor opening, coordinate with the tile pattern, support the planned drainage arrangement, and meet the project finish specification. The ODO-001-KH is available in a standard 600 × 80 × 25 mm configuration, while custom dimensions can be produced for different site conditions.

Recommended Specification at a Glance

• Specify the 600 × 80 × 25 mm ODO-001-KH model when the prepared opening and tile layout accommodate these dimensions.
• Choose a custom size if the floor opening, tile module, drain position, or required drainage layout differs from the standard configuration.
• Use stainless steel 304 with a finish such as brushed steel, matte black, brushed grey, brushed gold, chrome, baked lacquer, or PVD to match the project requirements.
• The drain is listed for commercial buildings, public facilities, hotels, wet rooms, and shower rooms, with OEM and ODM options available for project orders.

How to Determine the Correct Size

Start with the Installation Opening

The first measurement to verify is the actual opening prepared in the floor. The standard ODO-001-KH measures 600 mm in length, 80 mm in width, and 25 mm in height. Its listed material thickness is 2.0 mm. Because length, width, body height, and thickness can be customized, project buyers should provide these dimensions before production begins.

Coordinate the Drain with the Floor Finish

In a busy commercial washroom, the drain needs to work with the floor construction and the selected tile format. A tile insert cover creates a more continuous appearance because the surrounding tile can be integrated into the drain surface. If the standard 600 mm length or 80 mm width cannot be aligned with the opening or tile grid, a made-to-measure version is more suitable than adapting the floor around an unsuitable standard product.

Material, Finish, and Project Supply

The ODO-001-KH is made from stainless steel 304 and can be specified in several appearance options. Available finishes include brushed steel, matte black, brushed grey, brushed gold, chrome, baked lacquer, and PVD finishes. The final choice should reflect the bathroom hardware, interior design schedule, maintenance expectations, and overall project specification.

The product information states a minimum order quantity of 20 pieces and a listed delivery time of 20 days. ODO also reports 14 strict and complete quality-control processes. For larger or coordinated developments, OEM and ODM support allows the dimensions and finish to be defined around the project requirements.

Commercial Application Experience

ODO has supplied drainage products for a range of commercial and hospitality environments. Referenced projects include heavy-duty public restroom drains for a shopping mall complex, public-area floor drains for an office building, and custom-sized large-flow drains for a religious building. These applications demonstrate why size, visual finish, and drainage requirements should be reviewed as one specification rather than choosing a drain by length alone.

The listed Floor drain CE certificate, AiTSZ-250718038RC09, applies to ODO CE floor drains. The certificate identified as AiTSZ-250428030C-C01 concerns shower niches and should be considered separately from the floor drain certification.

Standard and Custom Options Compared

Frequently Asked Questions

Can the standard 600 × 80 × 25 mm size be used in any commercial bathroom?

No. This is the standard dimension listed for the ODO-001-KH, but it may not suit every floor opening or tile arrangement. Confirm the opening, tile module, body height, thickness, and drainage plan before ordering. Custom sizing is available where the standard format is unsuitable.

Which finish is most appropriate for a commercial installation?

The available finishes include matte black, brushed steel, brushed grey, brushed gold, chrome, baked lacquer, and PVD options. Select the finish that meets the project schedule and coordinates with the faucets, hardware, tiles, and other bathroom fittings.

What are the minimum order and support terms?

The listing specifies an MOQ of 20 pieces and a stated 20-day delivery time. Foshan Pinshi Sanitary Ware Co., Ltd. also lists 14 strict and complete quality-control processes, a two-year product warranty, re-shipment for transit damage, long-term spare-parts support, technical assistance, and fast response service.

Final Specification Checklist

Use the standard 600 × 80 × 25 mm ODO-001-KH when it fits the commercial bathroom opening, tile layout, and drainage plan. When the project calls for another length, width, height, or thickness, request a customized version. Before production, confirm the stainless steel 304 material, selected finish, quantity, opening dimensions, and required delivery schedule. ODO supports OEM and ODM projects, with the product listing stating a minimum order of 20 pieces and a 20-day delivery time. For technical assistance or a project quotation, contact charlene@seosodo.com.

About ODO

Foshan Pinshi Sanitary Ware Co., Ltd., under the ODO brand, is a sanitary ware manufacturer focused on bathroom accessories, floor drains, heated towel rails, niches, shower rooms, faucets, and shower sets. Founded in 2014, the company operates a factory of approximately 20,000 square meters, with 20 production lines, production and R&D equipment, and a 20-member research and design team. Its listed monthly capacity is 100,000 pieces.

Listed certifications include Floor drain CE AiTSZ-250718038RC09-CE-ROHS and Heated towel rack CE-LVD FTS22LC-8881S. The company serves residential development, hospitality, commercial construction, retail distribution, and public-facility customers.