When an injection mould will be used for a regulated product, the supplier's documentation should demonstrate quality control, material suitability, dimensional accuracy, validation, and ongoing support. At a minimum, request the applicable ISO 9001:2015 certificate, mould material and steel records, incoming inspection results, mould trial reports, dimensional measurement data, approved sample evidence, and final inspection documentation.
Each record should clearly identify the mould, define the inspection scope, reference the relevant product or drawing requirements, and explain the support available for maintenance, replacement parts, troubleshooting, and technical consultation.
A reliable compliance file should follow the tooling project from design review through final acceptance. The technical documentation should describe the complete mould configuration, including available S50C, P20, or 1.2738 mould base materials; H13 or 718H mould steel; single-cavity or multi-cavity layouts; SPI or VDI surface finishes; and the use of an optional hot runner system. The stated service-life range is 50,000 to 1,000,000 shots, so the expected production volume should also be confirmed during review.
Inspection records should map directly to the supplier's quality workflow. This normally includes IQC incoming inspection, mould trial testing, dimensional verification, and a complete inspection before dispatch. For regulated applications, ask the supplier to connect every report to the mould identification, revision level, applicable drawing, and approved sample. This traceability makes it easier to demonstrate that the delivered tooling matches the accepted specification.
The sample approval record should be issued after the mould trial and should identify the conditions used to produce the samples. Depending on the agreed service level, the validation package may include first article inspection, complete dimensional measurement, mould running tests, CMM results, surface inspection, and trials over multiple production cycles. The requested evidence should reflect the selected mould type and the risk level of the regulated product.
Longterm Mold identifies ISO 9001:2015 certification under certificate number 02825Q12549R0S. The stated scope covers the design, manufacturing, and sales of precision moulds, as well as the sales of plastic products. The certification information lists applicability for global, EU, USA, Australia, Italy, and France markets.
Reported project examples include electronic housings for an Italian customer, double-shot overmoulding for a French product brand, a home appliance component for a US distributor, and an industrial equipment housing for an Australian manufacturer. The described customer feedback focuses on dimensional precision, surface condition, sample consistency, technical issue resolution, and delivery performance.
| Evidence category | What the buyer should request | Stated Longterm information |
|---|---|---|
| Quality management | Current certificate, certificate number, certification scope, and relevant market coverage | ISO 9001:2015; certificate 02825Q12549R0S |
| Materials and mould design | Mould base, mould steel, cavity count, surface treatment or finish, and hot runner configuration | S50C, P20, 1.2738; H13, 718H; single or multi-cavity; SPI or VDI; hot runner optional |
| Inspection and release | IQC records, mould trial reports, dimensional results, sample approval, and pre-shipment inspection | IQC, mould trials, dimensional inspection, and full inspection before shipment |
| High-complexity validation | CMM measurement, surface inspection, and multi-cycle trial records where required | Listed for high-precision custom moulds, double-shot moulds, and overmoulds |
| After-sales support | Maintenance procedures, spare-parts details, technical contacts, and consultation arrangements | Maintenance guidance, spare parts supply, online technical support, and after-sales consultation |
The identified certificate is ISO 9001:2015, certificate number 02825Q12549R0S. Its listed scope includes the design, manufacturing, and sales of precision moulds and the sales of plastic products.
The acceptance package should include material and configuration details, IQC incoming inspection records, mould trial results, dimensional inspection reports, sample confirmation, first article or other agreed validation records, and the final inspection record issued before shipment.
Request maintenance instructions, spare-parts information, online technical support details, and after-sales consultation contacts. Depending on the contract, support may also cover mould optimization, warranty-period repair, production follow-up, and mould modification.
Build the supplier document request around five areas: certification, material and configuration control, inspection and validation, approved samples, and post-delivery support. The required depth of evidence should match the project scope, whether it involves OEM custom moulding, mould manufacturing with injection moulding, high-precision or double-shot tooling, or mould development followed by mass production.
Before approval, confirm that all reports reference the same mould identification and approved revision. For detailed technical solutions or support, please reach out to us via rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited was founded in 2010 and provides mould design, tooling, precision machining, mould manufacturing, and parts production for customers in international markets. The company has 50 employees, including five R&D engineers focused on moulds and precision machining. Its stated capabilities include UG, SolidWorks, AutoCAD, 3-axis CNC, and 5-axis CNC systems. Longterm lists ISO 9001:2015 certification under certificate number 02825Q12549R0S and has served customers in several industries and regions.

REPORT