Process | Purpose |
Spray on the tank (UF0) | Low pressure, rinse the groove liquid adhered to the surface of the workpiece back into the electrophoresis tank |
UF1 soaking and recycling | Low pressure, remove the groove liquid on the surface and inside of the workpiece again; Rinse with fresh UF solution after exiting the tank. |
UF2 spray recycling | High pressure, removal of solid paint on the surface of the workpiece |
Pure water spray | High pressure, large volume water washing to remove solid paint surface. Using immersion method, immerse the workpiece in deionized water. Unlike UF solution, deionized water does not bubble |
REPORT