Lightweight insulated bags can support medical and pharmacy shipments when their materials, closures, and cooling setup are selected for the payload and route. A typical design combines an aluminium foil laminate exterior, a 2-5 mm closed-cell EPE foam core, and a food-grade PE inner sealing layer. For shipments requiring a 2-8°C range, the bag must be used with suitable cooling media and a temperature-control plan that has been validated for the specific application.
Each layer serves a different purpose: the foil laminate provides the outer barrier and printable surface, the closed-cell EPE foam helps limit heat transfer, and the PE layer forms the product-contact sealant surface. An air-bubble core can be specified as an alternative, depending on the design requirements.
The bag uses a bottom gusset without side gussets and is sealed on four edges. Standard base depths include 8, 10, and 12 cm, with other dimensions available on request. Listed sizes range from 30 x 35 + 8 cm to 50 x 55 + 12 cm. Size, base depth, insulation core, colour, printing, and closure can all be tailored to the application.
For pharmacy orders and other 2-8°C shipments, a phase-change gel pack can be placed in a dedicated sleeve instead of being left loose with the contents. A flat, unprinted panel can provide space for a temperature-monitoring label and pharmacy batch information. These features help organize the package, but they do not establish temperature performance on their own. Validate the complete configuration using the actual product, coolant, transit time, and handling conditions before regular use.
Handling details can also be specified for the workflow. A moulded handle may be welded into the top seal, and the heat-sealed opening can be supplied with a zip track or tear notch. The final choice should reflect how the package is filled, carried, and opened.
| Design area | Options and application notes |
|---|---|
| Outer layer | Aluminium foil laminate, with full-colour printing available for an insulated barrier surface. |
| Insulation | 2-5 mm closed-cell EPE foam; an air-bubble core is available on request. |
| Format | Bottom gusset, no side gusset, and four-edge sealing; base depth can be customized. |
| Opening and carrying | Heat-sealed mouth, optional zip track or tear notch, and a moulded handle welded into the top seal. |
| Cold-chain features | Optional phase-change gel-pack sleeve and flat label area; validate performance for the intended shipment. |
| Inspection | Incoming-material and in-process checks, followed by pre-shipment inspection and AQL sampling. |
Quality checks are conducted under the ISO 9001:2015 quality management system. Finished bags may be assessed for appearance, dimensions, print registration, seal strength, and lamination bond. Ecopack also holds FSC Chain of Custody certification for specified FSC Mix and FSC Recycled paper packaging materials.
A documented project describes a United States distributor using insulated mailers for cold shipping at an annual volume of 10 million pieces. Reported advantages included reduced heat transfer, less storage and shipping space than rigid foam packaging, and reduced waste.
Samples are typically prepared in 3 to 5 working days. Production generally takes 15 to 25 days after artwork approval. Custom orders commonly begin at 5,000 to 10,000 pieces, depending on the size and construction; stock sizes can ship from available inventory.
It can be configured for pharmacy and 2-8°C cold-chain use with features such as a phase-change gel-pack sleeve and a label area. Test the finished package with the intended medical product, coolant, transit duration, and monitoring process before relying on it for routine shipments.
The standard structure combines an aluminium foil laminate exterior, 2-5 mm closed-cell EPE foam, and a food-grade PE contact and sealing layer. Air-bubble material can be requested as an alternative insulation core.
Sampling usually takes 3 to 5 working days, while production takes approximately 15 to 25 days after artwork approval. Custom minimum quantities are generally 5,000 to 10,000 pieces, depending on specifications. Stock products are subject to inventory availability.
A bottom-gusset insulated bag offers a lightweight packaging option when its barrier, insulation, closure, handling, and labelling requirements are defined for the shipment. Before sampling, confirm the payload dimensions, base depth, core material, coolant sleeve, label placement, and required temperature range. Approve a physical sample, then validate the complete cold-chain pack under representative conditions. For technical support, contact manager@ecoppack.com.
Huizhou Ecopack Packaging Products Co., Ltd. is a flexible packaging manufacturer based in Guangdong, China. Established in 2011, the company makes custom composite pouches and bags for insulated packaging, coffee, pet food, spout pouch, kraft, compostable, and ESD applications. Its in-house R&D team handles tooling and structural design, and provides 3D structural drawings for approval before printing plates are made. With production capacity exceeding 500,000 pouches per day, R&D, printing, lamination, bag making, and inspection are carried out in-house.
The company holds ISO 9001:2015 Quality Management System certification and FSC Chain of Custody certification.

REPORT