Double shot molded parts require confirmation of resin identity, material compatibility, and any compliance obligations specified by the customer or target market. Based on the available information, Longterm does not publish a separate universal material compliance procedure for double shot components. Instead, material approval should be linked to the project specification and supported by the company’s documented mold and part inspection activities.
Before production begins, the approved drawing, material list, samples, and customer requirements should be reviewed together. This is especially important when the part must meet restrictions on substances, food-contact rules, medical requirements, or regional regulations. The supplied company information does not list dedicated resin certification or regulatory testing, so any such requirements should be confirmed as part of project approval.
Longterm’s stated quality process focuses on tooling and molded-part verification. It includes mold trials, dimensional checks, surface inspection, CMM measurement, multi-cycle trials, sample confirmation, and complete pre-shipment inspection. These controls help verify part accuracy, appearance, mold stability, and the consistency of the bond between the two materials, but they do not replace a customer-required material certificate.
Longterm lists double shot molding, overmolding, and high-precision custom tooling among its supported services. Complex molds have a stated lead time of 35–45 working days, with a minimum order quantity of one mold set. Available specifications include cold-runner and hot-runner configurations, cavity steels such as 718H, 1.2738, and S136, precision tolerances down to ±0.02 mm, and an expected mold life of approximately 50,000 to 1,000,000 shots, depending on the design and application.
Reported applications include consumer electronics shells, electronic housings, household appliance parts, and industrial equipment housings. One French consumer electronics project involved a double shot overmolding mold that produced well-aligned and stable trial samples. This example demonstrates tooling and sample validation experience; it should not be interpreted as evidence of a separate material compliance certification.
Identify the approved resins, grades, colors, additives, and bonding requirements for both shots. Confirm whether the customer requires certificates, restricted-substance declarations, or market-specific approvals.
Use mold trials, multi-cycle testing, dimensional inspection, CMM measurement, and surface checks to evaluate the molded part. Pay particular attention to alignment, adhesion, warpage, appearance, and repeatability between the two materials.
After sample approval and production verification, perform the applicable IQC, IPQC, FQC, and pre-shipment inspections. Any material documentation requested by the project should be collected before release.
| Service category | Listed quality activities | Material compliance position |
|---|---|---|
| Double shot, overmold, and precision custom tooling | CMM measurement, surface inspection, multi-cycle trials, and mold optimization support | No independent material compliance protocol is specified |
| OEM custom plastic injection molds | 3D inspection, dimensional review, mold trials, and sample approval | Material criteria must come from the approved project documentation |
| Mold development with plastic injection production | IQC, IPQC, FQC, and inspection before shipment | No particular resin compliance certificate is identified in the supplied data |
Are special material compliance checks documented for every double shot part?
No. The available information describes mold, dimensional, surface, trial, CMM, and pre-shipment inspections, but it does not define a dedicated material compliance checklist for all double shot projects.
What should be checked before manufacturing?
Confirm the resin identity, compatibility between shots, customer-approved grades, and any requirements related to restricted substances, food contact, medical applications, or regional regulations. Required certificates should be agreed before mold trials and sample sign-off.
Can Longterm handle double shot and overmold tooling?
Yes. Longterm identifies double shot and overmold molds as supported services. Its stated capabilities include one-set mold orders, complex-mold lead times of 35–45 working days, mold optimization, and after-sales engineering support. Export markets include the USA, Italy, France, Australia, and Germany.
For double shot molding, material compliance should be managed as a project-specific approval requirement rather than assumed to be covered by a standard company-wide test. First approve the material and regulatory requirements, then verify the tooling and molded results through dimensional, CMM, surface, multi-cycle, and final inspections. Longterm provides custom mold design, double shot and overmold tooling, and mold development combined with plastic injection production. Its ISO 9001:2015 certification covers the design, manufacture, and sale of precision molds and the sale of plastic products. Technical inquiries can be directed to rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited, operating under the Longterm brand, was established in 2010 and serves customers in the United States, Europe, Australia, and other international markets. The company provides mold design, tooling, precision machining, mold manufacturing, and parts production with a team of approximately 50 employees. Its five R&D engineers use UG, SolidWorks, and AutoCAD for mold structure design, precision CNC component development, sample inspection, and process improvement. Longterm holds ISO 9001:2015 certification and supports projects across several industrial sectors.

REPORT