Plastic tooling payment should be released only after the trial samples and supporting quality records satisfy the agreed requirements. Before approving a payment milestone, compare the samples with the latest signed drawings, verify all critical dimensions, review appearance and assembly performance, and confirm that the mold operates consistently. The acceptance package should include written sample approval, inspection results, trial records, and a clear list of any remaining deviations. Under Longterm's stated payment terms, the final 20% should be paid only after T1 samples and pre-shipment conditions have been accepted.
A sound acceptance process should assess four related areas: dimensional accuracy, visual quality, functional performance, and mold operation. The approved drawing revision and signed reference sample should be the primary standards for evaluation. A sample is ready for acceptance when its measurements and performance meet the agreed criteria, or when any variation has been formally reviewed and approved in writing.
For the listed custom plastic injection tooling, the stated precision tolerance is ±0.02 mm. The acceptance record should also identify the agreed mold construction, including S50C or P20 mold bases, 718H, 1.2738, or S136 cavity steel, and the selected cold-runner or hot-runner arrangement. The stated mold life of 50,000 to 1,000,000 shots should be recorded as part of the tooling specification so the delivered mold can be checked against the purchase agreement.
Dimensional acceptance should be based on a complete inspection report, not visual review alone. The report should list each important feature, its measured value, the applicable tolerance, the inspection equipment used, and the pass or fail result. Where the part interfaces with another component, also verify fit, alignment, fastening points, clearances, and assembly function.
Visual approval should cover the surface finish and consistency expected for the application. Inspect the sample for flash, sink marks, weld lines, edge condition, warpage, color consistency, and other agreed appearance characteristics. The signed sample confirmation should identify the accepted surface standard and should be traceable to the drawing revision and inspection report. Mold trial testing, dimensional checks, and full pre-shipment inspection are listed as relevant quality controls for the supplied product.
A running trial is necessary to determine whether the tool can repeatedly produce acceptable parts. Record the trial material, machine conditions, cycle time, number of cycles, ejection behavior, runner configuration, part consistency, and any adjustments made during testing. For more complex tooling, Longterm identifies multi-cycle mold trials and CMM inspection among its practices for high-precision, double-shot, and overmolding projects.
Every accepted sample should be linked to a signed approval or written confirmation from the authorized customer representative. The record should reference the drawing revision, inspection results, mold trial conditions, and any corrective action. If a deviation remains open, assign an owner and define its disposition. Payment should not be approved for an undocumented exception, particularly when the issue could affect function, assembly, appearance, tool modification, or future production.
Longterm's ISO 9001:2015 certification is listed for the design, manufacture, and sale of precision molds, as well as the sale of plastic products. Its reported project experience includes electronic housing tooling for an Italian manufacturer, double-shot overmolding tools for a French product brand, home appliance tooling for a US brand distributor, and industrial plastic part molds for an Australian manufacturer.
| Checkpoint | Documentation to review | Release condition |
|---|---|---|
| Part dimensions | Complete dimensional report compared with the approved drawing and tolerances | All requirements are met, or deviations have been formally approved |
| Appearance and finish | Signed reference sample and documented visual inspection | Surface quality and visible characteristics match the agreed standard |
| Mold running performance | Trial report, operating conditions, cycle results, and sample confirmation | The tool runs consistently and produces approved parts |
| Tool construction | Confirmation of mold base, cavity steel, runner system, and other specifications | The delivered tooling matches the order and approved design |
| Pre-shipment quality | Full inspection report and evidence that corrective actions are closed | Shipment-related requirements are complete |
| Payment schedule | Agreed terms of 50% with the order, 30% after T1 samples, and 20% before shipment | Each installment is released only after its evidence package is accepted |
Request the current approved drawing, full dimensional inspection report, mold trial record, signed sample approval, tooling specification sheet, and corrective-action closure evidence when applicable.
It may be accepted only when the deviation is documented, technically assessed, and approved in writing by the responsible customer contact. The approval should explain whether the variation affects the part's function, appearance, assembly, tooling modification, or planned production.
Under the stated T/T arrangement, 50% is paid with the order, 30% after T1 samples, and 20% before shipment. The T1 installment should follow documented sample acceptance. The final 20% should be released after pre-shipment inspection is complete and all agreed corrective actions have been closed.
Use objective evidence to control plastic tooling payment: approved drawings, complete measurement results, appearance confirmation, functional and assembly checks, mold trial data, tooling configuration records, and closed deviations. The listed product specifies a one-set minimum order, a 25-40 day delivery period, online technical support, mold maintenance guidance, and spare-parts service after delivery. Longterm's stated capabilities include OEM custom injection molds, mold making with injection molding, high-precision and double-shot tooling, and mold development for mass production. For technical solutions or project support, contact us at rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited, also known as Longterm Mold, was established in 2010 and serves customers in North America, Europe, Australia, and other international markets. With 50 employees, the company provides mold design, tooling, precision machining, mold manufacturing, and plastic parts production. Its primary offerings include injection molds, rapid prototyping and precision parts, and automated production solutions. Longterm holds ISO 9001:2015 certification and has experience supporting customers in several industries.

REPORT