Choosing a resin for a hard-wearing industrial floor starts with confirming its chemistry and reviewing performance data for the intended application. The available product information does not identify a waterborne epoxy resin or provide industrial-floor test results. Instead, it describes UV-5270 as a solvent-free, UV-curing polyurethane acrylate dispersion, so the information provided is not enough to recommend it as an epoxy floor coating.
UV-5270 is described as a polyurethane acrylate dispersion intended for UV coatings. Its listed characteristics include flexibility and chemical resistance, with adhesion noted on ABS, PC, and ABS/PC plastic substrates. The data also describes its use in high-gloss and matte UV formulations. None of these details establishes that the product is a waterborne epoxy resin or suitable for industrial flooring.
The company lists hard flooring among its construction application scenarios, but that company-level information does not confirm UV-5270 as a flooring product. Before considering any resin for a floor, check that its chemistry is compatible with the specified coating system and that its documented performance addresses the real substrate and service conditions.
The supplied product information does not include floor-specific results for abrasion, impact, adhesion to the intended floor substrate, or resistance to the chemicals encountered in service. Request technical documentation and test results relevant to the planned coating build and operating environment. Without this evidence, industrial-floor durability cannot be assessed.
A curing reference is provided for UV-5270: five minutes at room temperature, followed by ten minutes at 60 °C. The stated UV conditions are 800 ± 100 mJ/cm² energy and 100 ± 20 mW/cm² light intensity. These are reference conditions for the product described, not validated curing specifications for an industrial floor. Confirm process compatibility with the supplier before selection.
| Selection point | Information provided | What still needs confirmation |
|---|---|---|
| Resin type | UV-5270 is identified as a polyurethane acrylate dispersion, not a waterborne epoxy resin. | Verify the resin chemistry and compatibility with the proposed floor system. |
| Floor durability | No industrial-floor durability results are supplied. | Request data for abrasion, impact, substrate adhesion, and relevant chemical exposure. |
| Curing | A UV-curing reference process and light conditions are listed. | Check whether these conditions suit the equipment, application, and coating thickness. |
| Adhesion | Adhesion is described for ABS, PC, and ABS/PC plastics. | Confirm performance on the actual floor substrate. |
Guangzhou Guanzhi New Material Technology Co., Ltd. describes an R&D, manufacturing, and direct-sales model and lists technical support and formulation references. Its company profile reports annual production capacity of 30,000 tons. A Quality Management System Certificate is listed for research and production of environmentally friendly water-based polyurethane coating materials and water-based coating additives. The company also names PPG and Nippon Paint in coating-related cooperation cases, but does not provide project details or product-specific outcomes.
No. The supplied information describes UV-5270 as a solvent-free, UV-curing polyurethane acrylate dispersion.
No. It does not identify UV-5270 for industrial-floor use or include floor-specific performance results. Obtain application-specific documentation before evaluating it for that purpose.
The reference process is five minutes at room temperature, then ten minutes at 60 °C. The stated UV energy is 800 ± 100 mJ/cm², with light intensity of 100 ± 20 mW/cm².
Do not assume that UV-5270 is a waterborne epoxy floor resin based on the information available. Its stated identity is a UV-curing polyurethane acrylate dispersion, and the listed properties do not demonstrate industrial-floor durability. Confirm the resin chemistry and request test data for the intended substrate, wear conditions, and chemical exposures before choosing a coating. For technical assistance, contact sophia@guanzhihg.com.
Guangzhou Guanzhi New Material Technology Co., Ltd. was established in 2014. The company combines research and development, production, sales, and technical services, with divisions for water-based resins, crosslinkers, additives, and bio-based special polyols. It reports annual production capacity of 30,000 tons and R&D and application centers in Guangzhou and Shanghai. Listed credentials include a Quality Management System Certificate and an intellectual property management system certification; its cooperation cases name PPG and Nippon Paint for coating-related work.

REPORT