An accurate quotation for a custom insulated cooler bag depends on a complete technical brief. The factory needs the finished dimensions, bag format, insulation layers, film specifications, closure system, sealing method, printing requirements, intended application, customization details, order volume, and quality expectations.
For a metallised foil insulated mailer, the quotation brief should also identify the sponge thickness or density, film gauge, surface finish, print colours, and whether the bag requires a zipper, a peel-and-seal strip, or both.
The first quotation input is the completed bag size. This product is designed as a flat insulated mailer with no gusset. The buyer should provide the finished width and height, identify the required size category from S through XL, and state whether the dimensions are standard or require a custom cut.

Dimensions influence the cutting layout, material consumption, finished capacity, and packing arrangement. A clear size specification helps the factory calculate both the product cost and the most suitable production method.
The insulation structure should be described layer by layer. The listed design contains a 20 mm sponge layer covering the full face, rather than a partial insert. Its exterior uses silver metallised film to reflect heat, while the interior uses PE film with a sealant layer for a smooth, wipe-clean surface.

The brief should clarify whether the required appearance is standard silver or matt silver. It should also state the sponge density, insulation thickness, and film gauge if these differ from the listed construction. These variables affect thermal performance, flexibility, puncture resistance, appearance, and unit pricing.
Closure components should be specified separately from the body materials. This mailer combines a two-rib zipper with a peel-and-seal adhesive strip, while the remaining three sides are welded closed. The buyer should confirm whether both closure systems are necessary and provide the required position of the adhesive strip.
A zipper supports repeated access and possible returns, whereas a peel-and-seal strip provides a convenient shipping seal. The factory also needs to know whether the bag will be opened once or used repeatedly during storage and delivery.
Print instructions should identify the printable surface, artwork panel, number of colours, logo position, and any need for a white base beneath the design. The available product information supports one- to two-colour printing on metallised film, with a white underlayer where improved colour visibility is needed.

If a matt silver appearance is required, it should be included in the initial specification because the finish can affect artwork appearance and material selection. Ecopack confirms new designs on a physical sample bag after sampling, rather than depending only on a digital screen proof.
The intended use helps the factory evaluate the most appropriate construction. Typical applications include medicine, chilled food, perishable goods, product samples, pharmacy shipments, and e-commerce parcel fulfilment.
For pharmaceutical shipments or 2-8°C cold-chain distribution, the design brief may also need to cover a gel-pack sleeve, front label window, shipping documentation, and handling instructions. An “insulated” requirement alone does not define the complete shipping system, so these related features should be identified before pricing.
Order volume has a direct effect on tooling, material purchasing, production planning, and unit cost. Custom orders commonly fall within the 5,000 to 10,000-piece range, although the final minimum order quantity depends on the bag dimensions, material structure, print specification, and requested customization.
Samples generally require 3 to 5 working days. Normal production takes approximately 15 to 25 days after artwork approval. Buyers should also state their required delivery date and whether pre-production samples or additional testing are needed.
Quality expectations should be agreed before the quotation is finalized. Ecopack controls incoming materials, production processes, and pre-shipment goods under its ISO 9001:2015 quality management system and applies AQL sampling to finished products. Where independent verification is required, samples can be sent to a laboratory selected by the buyer and shipped with the relevant report.
| Quotation Item | Details to Confirm | Design or Cost Impact |
|---|---|---|
| Format and dimensions | Flat mailer or alternative format; width, height, and size category | Determines cutting layout, material consumption, and usable capacity |
| Insulation structure | Outer film, sponge thickness or density, inner film, and film gauge | Influences thermal barrier, cushioning, flexibility, and material selection |
| Closure and sealing | Two-rib zipper, peel-and-seal strip, welded edges, or a selected combination | Defines assembly steps, sealing equipment, and reclosure performance |
| Printing and finish | Print colours, white base, print location, and matt silver requirement | Controls artwork preparation, printing method, and visual result |
| Application and volume | Product type, shipping conditions, target quantity, and launch date | Supports material selection, production scheduling, and price calculation |
| Inspection requirements | Sampling plan, laboratory testing, reports, and approval process | Sets verification procedures and possible additional costs |
At minimum, provide the finished width and height, bag format, insulation structure, outer and inner films, closure system, sealing method, print requirements, intended use, target quantity, and delivery schedule. The factory can then recommend a construction and prepare a more dependable estimate.
Yes. Available options include custom dimensions, sponge density, film gauge, matt silver treatment, and printed artwork. Any variation from the standard silver film, 20 mm sponge, PE inner layer, or listed closure should be clearly marked in the quotation brief.
Sampling normally takes 3 to 5 working days. Mass production typically takes 15 to 25 days after artwork approval. The production schedule begins once the final artwork has been confirmed.
Medicine, chilled food, samples, and perishables may require different insulation performance, labeling, closure access, and shipping accessories. Explaining the use allows the factory to assess the complete packaging system rather than price only the outer bag.
To receive an accurate custom insulated cooler bag quotation, prepare one consolidated brief covering dimensions, material layers, insulation thickness and density, closure, sealing, printing, surface finish, application, quantity, schedule, and inspection requirements. This information allows the supplier to calculate material usage, production steps, and any customization costs with fewer revisions.
Huizhou Ecopack Packaging Co., Ltd. is a manufacturer and exporter with in-house R&D, printing, lamination, bag making, and inspection capabilities. Custom production commonly ranges from 5,000 to 10,000 pieces. The company operates under ISO 9001:2015 quality procedures and holds FSC Chain of Custody certification. For technical support or a project quotation, contact manager@ecoppack.com.
Huizhou Ecopack Packaging Products Co., Ltd. is a flexible packaging manufacturer based in Guangdong, China, and established in 2011. The company produces custom composite pouches and bags, including insulated mailers and thermal packaging, with printing and manufacturing completed in house for customers in more than 40 countries.
Ecopack provides in-house tooling and structural design support, including 3D structural drawings for customer approval before printing plates are produced. R&D, printing, lamination, bag making, and inspection are handled under one roof. Its certifications include ISO 9001:2015 Quality Management System and FSC Chain of Custody. The company has supported customers in sectors such as cold-chain distribution, including a United States distributor using insulated mailers for temperature-sensitive shipments.

REPORT