What Should a Drawing Include for a Custom Tile-Insert Floor Drain?

A custom tile-insert floor drain drawing should give the technical team enough information to verify the product configuration, dimensions, installation conditions, and visual finish. Include the drain style, overall measurements, tile-recess details, outlet position, surface treatment, and intended project application. A clearly dimensioned drawing is especially important when the design calls for linear, square, invisible, or large-flow drainage.

Essential Information to Include

There is no fixed drawing template identified in the available ODO product information. However, the submission should clearly identify every custom requirement so that the design can be assessed without relying on assumptions or an unmarked reference image.

• Specify whether the product is a linear, square, or tile-insert floor drain.
• Mark the complete product dimensions, including any non-standard measurements.
• Show the tile-insert recess and its connection to the surrounding drain frame.
• Indicate the outlet location, drainage direction, and any high-capacity flow requirement.
• Name the requested surface finish instead of communicating it only through a color sample.
• State the installation environment, such as a bathroom, wet room, hotel, commercial building, balcony, or accessible facility.

How to Prepare the Drawing

Define the Drain Configuration

Begin with a product identification note or title block that describes the requested format. ODO supplies several floor drain configurations, including linear, square, and tile-insert designs. This designation establishes the basic product arrangement and helps the reviewer understand which technical details should be checked.

Dimension the Drain and Tile Recess

The primary view should display the full length, width, depth, and other relevant dimensions. For a tile-insert model, add a detailed view of the recessed area. The drawing should show the size of the customer-supplied tile section, the supporting frame, and the relationship between the insert and the visible drain surface. These details are necessary to achieve the intended flush or concealed appearance.

Show Outlet and Flow Requirements

Mark the outlet position and drainage direction directly on the plan or section view. If the project needs a particular outlet arrangement, an offset connection, or a large-flow solution, include that requirement in the drawing notes. Custom-size drainage products have been used in project applications such as a Tel Aviv commercial complex and an Abu Dhabi mosque, where project-specific drainage conditions required clear engineering information.

Identify the Finish and Installation Context

Write the required finish beside the appropriate product view. Relevant project requirements may include brushed gold, brushed grey, brushed steel, chrome, or another specified treatment. Naming the finish is more reliable than using color alone, because the same visual tone can represent different materials or processes.

The intended use should also appear on the drawing or in the accompanying specification. ODO application scenarios include residential bathrooms, hotel and hospitality facilities, wet rooms, shower rooms, commercial buildings, balconies, outdoor patios, and barrier-free bathrooms. The application context can affect drainage performance, access requirements, waterproofing details, and installation coordination.

Drawing Review Checklist

Frequently Asked Questions

Is an official ODO drawing template required?

The supplied information does not state that a mandatory ODO template must be used. A professional, dimensioned drawing is suitable as long as it identifies the drain type, measurements, tile-insert details, outlet arrangement, finish, and intended application.

Can custom dimensions be included?

Yes. ODO project information refers to custom-size drainage products and large-flow floor drain requirements. Every non-standard dimension should be marked clearly, with units and tolerances added where they are important to installation or manufacturing.

Which floor drain styles should be named?

The drawing should state whether the request concerns a linear floor drain, square floor drain, or tile-insert design. Naming the configuration at the start helps keep the engineering review focused and prevents confusion between different drain structures.

Recommended Submission

For a smooth technical review, submit a dimensioned plan and section drawing together with notes covering the tile recess, outlet arrangement, finish, flow requirement, and installation environment. This gives ODO a practical reference for checking the custom design and preparing an appropriate solution.

Foshan Pinshi Sanitary Ware Co., Ltd., operating under the ODO brand, supports OEM and ODM projects and lists a minimum order quantity of one for its sanitary ware and project solutions. The company also references CE certification for its floor drain products and the ODO-D114 Dual-purpose Invisible Floor Drain Utility Patent Certificate. For technical assistance or a custom drainage discussion, contact charlene@seosodo.com.

About Us

Foshan Pinshi Sanitary Ware Co., Ltd., operating under the ODO brand, is a modern sanitary ware enterprise with facilities in Foshan, Zhongshan, and Jiangmen, Guangdong, covering bathroom accessories, floor drains, heated towel rails, niches, shower rooms, faucets, and shower sets. The factory covers about 20,000 square meters and follows 14 quality control processes, supported by a professional R&D and design team of 20 members. Its products include floor drain CE certification and the ODO-D114 invisible floor drain utility patent, and its project records cover clients across multiple industries.