Choosing the right injection mould starts with a clear understanding of the part and the planned manufacturing output. Geometry, dimensional tolerances, cosmetic expectations, annual demand, and total shot volume all influence the tooling concept. A suitable mould design should balance these requirements with the intended cavity layout, mould materials, runner system, and inspection plan.
Before deciding on a mould configuration, define the essential characteristics of the plastic part. Include the part shape, wall features, surface appearance, critical dimensions, material considerations, and production schedule. This information gives the mould supplier a practical basis for evaluating the tooling solution.
Longterm offers mould options with single-cavity or multi-cavity layouts, SPI or VDI surface specifications, and an optional hot runner system. The correct combination depends on the individual part and required output; the available product information does not establish a fixed cavity-count formula for every application.
Production volume is a central factor in mould selection. The stated mould-life range is 50,000 to 1,000,000 shots. Compare your anticipated production requirement with this range, then discuss the applicable service expectation, maintenance needs, and operating conditions with the supplier before releasing the tool for manufacture.
A lower-volume project may require a different tooling approach from a long-running program. Similarly, a multi-cavity mould may support higher output per cycle, while a single-cavity layout can be considered where production needs, part complexity, or project planning make it appropriate. Final selection should be based on the actual part data and production target.
The listed mould-base material options are S50C, P20, and 1.2738. Available mould steels include H13 and 718H. These materials should be treated as supplier-provided choices that need project-specific confirmation rather than as a universal recommendation for all moulding programs.
Surface finish also needs to be stated clearly in the design brief. SPI and VDI finishes are available options, allowing requirements for appearance and texture to be communicated during the tooling stage. Where relevant, the optional hot runner should be reviewed with the supplier to determine whether it aligns with the mould layout and production plan.
| Selection area | Available information | How to use it |
|---|---|---|
| Planned production quantity | Stated mould life of 50,000–1,000,000 shots | Compare forecast demand with the stated range and confirm project expectations. |
| Cavity arrangement | Single-cavity or multi-cavity tooling | Review part details and output requirements with the mould supplier. |
| Mould base materials | S50C, P20, or 1.2738 | Confirm the appropriate listed option for the intended application. |
| Mould steel choices | H13 or 718H | Evaluate against part requirements and the planned production program. |
| Finish and runner system | SPI or VDI finish; hot runner available as an option | Specify the required surface quality and discuss runner suitability. |
| Quality verification | IQC, mould trials, dimensional checks, and final inspection | Agree on approval samples and inspection criteria before shipment. |
Tooling selection should be followed by a defined verification process. Longterm lists IQC incoming inspection, mould trial testing, dimensional inspection, and full inspection before shipment. Trial samples and acceptance requirements can be discussed during project approval to help ensure that the delivered tool meets the agreed requirements.
The company also lists mould maintenance guidance, spare-parts availability, online technical support, and after-sales consultation. Its ISO 9001:2015 certification covers the design, manufacturing, and sales of precision moulds as well as the sales of plastic products.
Longterm identifies applications including consumer electronics housings and connectors, along with household-appliance housings and control panels. Reported examples include an electronic housing mould for a handheld device and a double-shot overmoulding project for a consumer electronics shell.
These examples indicate experience with dimensional control, surface quality, alignment, trial samples, and delivery coordination. However, they should not be interpreted as predefined design specifications or production-volume recommendations for other customer parts.
Review the expected shot count against the stated 50,000–1,000,000 shot range. The final expected mould life and maintenance arrangement should be confirmed with the supplier for the specific project.
Both configurations are available, but there is no universal choice. Provide the part design, demand forecast, and production schedule so the supplier can assess a suitable layout.
The listed controls include incoming inspection, mould trials, dimensional inspection, and full inspection before shipment. Sample approval expectations can also be established as part of the project process.
A well-selected injection mould is built around the part geometry, finish specification, target output, expected shot volume, cavity arrangement, material options, and verification criteria. Longterm lists a minimum order quantity of one set, a typical delivery period of 20–35 days, and export markets across Europe, North America, and Australia. For technical support or moulding solutions, contact Roger Luo at rogerluo@longterm-mold.com.
Longterm Manufacturing Solutions Limited was established in 2010 and serves customers in the United States, Europe, Australia, and other international markets. The company reports a 50-person team providing mould design, tooling, precision machining, mould manufacturing, and parts production. Its ISO 9001:2015 certification covers precision mould design, manufacturing, sales, and plastic-product sales, while its project experience includes consumer electronics, home appliances, and industrial components.

REPORT