Before installing this coffee machine, prepare a 220 V electrical supply that operates at either 50 Hz or 60 Hz. The unit is rated at 1,450 W. Water may be provided through its removable 1.2 L tank, a direct connection to a water system, or a water bucket. After switching on, allow approximately 25 seconds for the machine to preheat before brewing.
\nThe coffee machine is designed for a 220 V supply at either 50 Hz or 60 Hz, with a rated load of 1,450 W. Check that the intended installation site provides a matching voltage and frequency and that the circuit can safely support the machine's power demand. The available product information does not identify the plug configuration or specific electrical protection requirements, so these points should be verified before installation.
\nFor independent operation, fill the removable water tank, which has a capacity of 1.2 L. The specifications also indicate that the machine can be fed from a direct water system or a water bucket. Because no inlet pressure, hose specification, or connection fitting is listed, confirm the required connection details with the supplier or installation team.
\nOnce powered on, the machine needs about 25 seconds to preheat. It includes controls for large and small cups, a power button, and a removable water storage tray. Use only DG or DG Plus capsules as specified for this model.
\n| Item | Product specification | Recommended check |
|---|---|---|
| Voltage and frequency | 220 V, 50/60 Hz | Verify that the local electrical supply matches both values. |
| Rated power | 1,450 W | Confirm that the installation circuit has sufficient capacity. |
| Water provision | Removable 1.2 L tank, direct water-system connection, or water bucket | Select a supported method and confirm any connection requirements. |
| Preheating period | 25 seconds | Wait for the machine to heat before starting extraction. |
| Capsule format | DG and DG Plus | Prepare capsules that match the stated formats. |
What
REPORT